OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!


  VW Parts Catalog > Engine Parts >

6 MM Stud Conversion Kit for Oil Pumps, 3036-10
6 MM Stud Conversion Kit for Oil Pumps, 3036-10


 
6 MM Stud Conversion Kit for Oil Pumps, 3036-10 helps you install the 8mm stud oil pumps into your 6mm studded case that you are using. Using this kit prevents leaks and problems, and is needed because new 6mm stud pumps are no longer available! ACN recommends that you use a 21mm pump in any single relief case application.

The stud spacing on the 6mm studded cases is slightly different than the 8mm version. If they were the same you could just drill and tap the holes to 8mm, and use an 8mm studded pump, and bolt it together. But it's not that simple. That's also why you cannot simply use a "step stud" with a 6mm case end, and 8mm pump end. So this kit includes 4 long studs, nuts, and washers. You put the studs in, and thread them so they protrude in the case enough to get the nuts on the inside. Use loctite, and tighten the nuts against the case, with no stud sticking further than the top of the nut. Now the pump nuts on the outside can be tightened without the risk of the stud stripping the case threads, since it's backed by a steel nut on the inside!
Price: $6.95


: 3036-10


QTY:
Overview
 
6 MM Stud Conversion Kit for Oil Pumps, 3036-10 helps you install the 8mm stud oil pumps into your 6mm studded case that you are using. Using this kit prevents leaks and problems, and is needed because new 6mm stud pumps are no longer available! ACN recommends that you use a 21mm pump in any single relief case application.

The stud spacing on the 6mm studded cases is slightly different than the 8mm version. If they were the same you could just drill and tap the holes to 8mm, and use an 8mm studded pump, and bolt it together. But it's not that simple. That's also why you cannot simply use a "step stud" with a 6mm case end, and 8mm pump end. So this kit includes 4 long studs, nuts, and washers. You put the studs in, and thread them so they protrude in the case enough to get the nuts on the inside. Use loctite, and tighten the nuts against the case, with no stud sticking further than the top of the nut. Now the pump nuts on the outside can be tightened without the risk of the stud stripping the case threads, since it's backed by a steel nut on the inside!

Share your thoughts on this product with other customers...
Click here to be the first to WRITE A PRODUCT REVIEW!