OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!

VW Parts Catalog > Transmission & Clutch > New & Rebuilt Transmissions > Drag Race & Sand
19 products found
Sort By:
1
17mm Trans Axle Drain Plug and IRS Diagonal Arm Bolt Tool, 7029
17mm Transaxle Drain Plug and IRS Diagonal Arm Bolt Tool, 7029
Price: $5.95

17mm Trans Axle Drain Plug and IRS Diagonal Arm Bolt Tool, 7029 is used to drain and change the gear oil in your VW Transmission, or to loosen and tighten the diagonal arm bolt on IRS Type 1 Transmissions.. Snaps on to any ratchet so you an quickly remove the drain plug. Chrome plated hardened steel for long life. more info
Clutch Pedal Shaft (Short Arm), 1964-72 Type 1 and 3, 113-721-305B
Clutch Pedal Shaft (Short Arm), 1964-72 Type 1 and 3, 113-721-305B
Price: $12.95

Clutch Pedal Shaft (Short Arm), 1964-72 Type 1 and 3, 113-721-305B sits in the pedal assembly, and connects the pedal to the actual cable. The cable slips over the hook on this shaft, and eventually wears through the hook (it breaks off and the cable is no longer actuated). more info
Clutch Pedal Shaft (Long Arm), 1972-79 Type 1 and 3, 111-721-305B
Clutch Pedal Shaft (Long Arm), 1972-79 Type 1 and 3, 111-721-305B
Price: $14.95

Clutch Pedal Shaft (Long Arm), 1972-79 Type 1 and 3, 111-721-305B sits in the pedal assembly, and connects the pedal to the actual cable. The cable slips over the hook on this shaft, and eventually wears through the hook (it breaks off and the cable is no longer actuated). more info
Amsoil Synthetic Severe Gear Oil, 80W-90, QUART, AGLQT-EA
Amsoil Synthetic Severe Gear Oil, 80W-90, QUART, AGLQT-EA
Price: $17.95

Amsoil Synthetic Gear Oil, 80W-90, QUART, AGLQT-EA is HIGHLY RECOMMENDED for our Vintage VWs with manual transmissions. EASY shifting when it's very cold out (you don't have to warm up first), and superior protection and easy shifting, GREAT UPGRADE! This product can ONLY ship via Ground (UPS Ground, USPS Parcel Post, etc)! This gear oil does not include the corrosive additives that GL-5 oils have (NEVER use these). We only carry the top of the line Synthetic gear lube, and this IS compatible with Limited Slip differentials! You can also use this in steering boxes! more info
Amsoil Severe Duty Synthetic Gear Oil, 75W-90, QUART, SVGQT-EA
Amsoil Severe Duty Synthetic Gear Oil, 75W-90, QUART, SVGQT-EA
Price: $17.95

Amsoil Severe Duty Synthetic Gear Oil, 75W-90, QUART, SVGQT-EA is HIGHLY RECOMMENDED for our Vintage VWs with manual transmissions. EASY shifting when it's very cold out (you don't have to warm up first), and superior protection and easy shifting, GREAT UPGRADE! This product can ONLY ship via Ground (UPS Ground, USPS Parcel Post, etc)! This gear oil does not include the corrosive additives that GL-5 oils have (NEVER use these). We only carry the top of the line Synthetic gear lube, and this IS compatible with Limited Slip differentials! You can also use this in steering boxes! more info
Axle Spacer Kit, Swingaxle Type 1 up to 1966, One Side (2 Pieces), AC501497
Axle Spacer Kit, for Swingaxle VW, One Side (2 Pieces), AC501497
Price: $19.95

Axle Spacer Kit, Swingaxle Type 1 up to 1966, One Side (2 Pieces), AC501497 cures perpetual leaks that you can never seem to fix no matter how many times you try! Over time the axle seal will "groove" the spacer, and then there is no way to seal! This kit will do one wheel, it comes with a thick and thin spacer. more info
HP Axle Spacers, Swingaxle, Stock Width, 4 Pieces
High Performance Axle Spacers, Swingaxle, Stock Width, 4 Pieces
Price: $34.95

Stock axle spacers are notoriously weak, and also "groove" from the axle seal, and this causes perpetual leaks that you can never seem to fix no matter how many times you try! This version is stock width for all Swing Axle Type 1 Transaxles. more info
Bench Model Engine Stand
Bench Model Engine Stand
Price: $44.95

Bench Model Engine Stand bolts to a workbench or table, and rotates a full 360 degrees. This bench mount engine stand is constructed of thick wall schedule 80 steel pipe. ACN Tip: You can also use this to hold your transaxle!

Note that you may have to grind the ears of the stand slightly to perfectly fit your engine case. Apparently they crack the whip on the guys making these, and they are rushing a bit. more info
VW Rear Chassis Dolly (Frame Horn Dolly)
VW Rear Chassis Dolly (Frame Horn Dolly)
Price: $49.95

Rear support fits all Type 1 bugs, sandrails, and bajas. Lets you move your car when both engine and swing axle transaxle are removed. All steel construction and powder coated with 6” caster.

This bolts to the end of your frame horns and allows you to roll it around your shop with the trans axle out!

 more info
Super Duty Engine Stand, Bench Model
Super Duty Engine Stand, Bench Model
Price: $129.95

Bolts to a workbench or table, and rotates a full 360 degrees. This bench mount engine stand is the finest Bench Model Engine Stand you can have without making it yourself! You can also use this to hold your transaxle too! Your table is more likely to tip over or break than this engine stand will! more info
Engine Stand, Floor Model, Square Tube Style, 00-5007-0
Engine Stand, Floor Model, Square Tube Style, 00-5007-0
Price: $149.95

Engine Stand, Floor Model, Square Tube Style, 00-5007-0 rotates a full 360 degrees, and has steel casters for mobility. Knocks down when not in use to save space. You can also use this to hold your transaxle! more info
Super Duty High Performance Swing Axle, 1967 Type 1, Long (28 7/16"), EACH, 16-2231
Super Duty High Performance Swing Axle, 1967 Type 1, Long (28 7/16"), EACH (single axle), 16-2231
Price: $249.95

Super Duty High Performance Swing Axle, 1967 Type 1, Long (28 7/16"), EACH, 16-2231 is crafted from Aircraft Steel. This axles is precision machined, heat treated, then ground smooth. These are not tapered like stock axles, their straight design allows them to "wrap up" like a torsion bar, preventing trans axle shock load and breakage. more info
Super Duty Drag Racing Swing Axles, 3" Narrowed (23 1/2" Long), EACH, 16-2237
Super Duty Drag Racing Swing Axle, 3" Narrowed (23 1/2" Long), EACH (single axle), 16-2237
Price: $249.95

Super Duty Drag Racing Swing Axle, 3" Narrowed (23 1/2" Long), EACH, 16-2237 is crafted from Aircraft Steel, these axles are precision machined, heat treated, then ground smooth. These are not tapered like stock axles, their straight design allows them to "wrap up" like a torsion bar, preventing trans axle shock load and breakage. more info
Super Duty High Performance Swing Axle,1961-66 Type 1, Short (26 11/16"), EACH, 16-2230
Super Duty High Performance Swing Axle,1961-66 Type 1, Short (26 11/16"), EACH (single axle), 16-2230
Price: $319.95

Super Duty High Performance Swing Axle,1961-66 Type 1, Short (26 11/16"), EACH, 16-2230 is crafted from Aircraft Steel. This axle is precision machined, heat treated, then ground smooth. These are not tapered like stock axles, their straight design allows them to "wrap up" like a torsion bar, preventing trans axle shock load and breakage. more info
Sway-A-Way Super Axles,1961-66 Type 1 and All Type 3, Short (26 11/16"), Pair
Sway-A-Way Super Axles,1961-66 Type 1 and All Type 3, Short (26 11/16"), PAIR
Price: $409.95

Sway-A-Way Super Axles,1961-66 Type 1 and All Type 3, Short (26 11/16"), Pair are crafted from Aircraft Steel, these axles are precision machined, heat treated, then ground smooth. These are not tapered like stock axles, their straight design allows them to "wrap up" like a torsion bar, preventing transaxle shock load and breakage. more info
Sway-A-Way Super Axles,1967 Type 1 and All Type 3, Short (27 13/16"), Pair
Sway-A-Way Super Axles,1967 Type 1 and All Type 3, Short (27 13/16"), PAIR
Price: $409.95

Sway-A-Way Super Axles,1967 Type 1 and All Type 3, Short (27 13/16"), Pair are crafted from Aircraft Steel, these axles are precision machined, heat treated, then ground smooth. These are not tapered like stock axles, their straight design allows them to "wrap up" like a torsion bar, preventing transaxle shock load and breakage. more info
Sway-A-Way Super Axles,1968 Type 1 and All Type 3, Long (28 7/16"), Pair
Sway-A-Way Super Axles,1968 Type 1 and All Type 3, Long (28 7/16"), PAIR
Price: $429.95

Crafted from Aircraft Steel, these axles are precision machined, heat treated, then ground smooth. These are not tapered like stock axles, their straight design allows them to "wrap up" like a torsion bar, preventing transaxle shock load and breakage. more info
Sway-A-Way Super Pro Axles, 3" Shorter Type 1, (23 11/16"), Pair
Sway-A-Way Super Pro Axles, 3" Shorter Type 1, (23 11/16"), PAIR
Price: $499.95

Crafted from Aircraft Steel, these axles are precision machined, heat treated, then ground smooth. These are not tapered like stock axles, their straight design allows them to "wrap up" like a torsion bar, preventing transaxle shock load and breakage. more info
OEM VW Rhino Transmission Case, Aluminum ("White Rhino"), 081-301-513_AL
OEM VW Rhino Transmission Case, Aluminum ("White Rhino"), 081-301-513-AL
Price: $749.95

OEM VW Rhino Transmission Case, Aluminum ("White Rhino"), 081-301-513_AL is the strongest VW Transmission Case available. When building up a strong transmission, this is where you start! The Rhino transmission case is 40% stronger the a standard case, with extra deep webbing and reinforcement cast right in! For a while you could buy both the Magnesium Rhino Case, and the Aluminum "White Rhino" case, but the Magnesium version is NLA. The White Rhino Case is 50% heavier than the magnesium one. While Magnesium has the weight advantage, Aluminum Alloy is the definitive choice for a better yield strength under high stress applications (Racing!).

Case does not come with starter bushings, cross shaft bushing or studs.

This OEM VW Rhino Case comes setup for the "late" T/O bearing and T/O crosshaft bushings, but other than that it's a direct replacement for VW Beetle, Ghia, and Type 3 swing axle transmissions from 1961-69, and VW Bus from 1961-67. more info
   
 
1
SITE USE DISCLAIMER ** READ FOR BEST UNDERSTANDING and USE OF OUR PARTS SERVICE!**

PRODUCT AVAILABILITY can vary and short-term backorders are common. Immediate shipment of requested products is NOT guaranteed. Orders are processed in the order that they are received and order fulfillment time varies.

PRODUCT IMAGES are representative only. Actual product may differ in appearance. Please do NOT rely on PHOTOS while shopping as many of our products have selectable product options that may change the nature of the product being ordered compared to the representative photo. Make your product selections based on the PRODUCT DESCRIPTION and OPTION INFORMATION presented in the detailed product listing.

CATALOG ERRORS: Although every effort has been made to provide accurate pricing and product technical and vehicle application information, THIS CATALOG MAY CONTAIN ERRORS (typographical, photographic, or informational). All information should be verified prior to use.

PRICES are subject to change without obligation. In most cases we are able to honor advertised price, but in the RARE case a substantial price increase occurs, you would be notified and given the option to cancel.

PRODUCT INFORMATION: All information provided by Aircooled.Net (via website or email) is for USE AT YOUR OWN RISK. All products purchased should be inspected, measured, cleaned and properly assembled prior to installation. Since Aircooled.Net has no control over product installation, we will not be held liable for any consequential costs or damages associated with products purchased.