OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!

VW Parts Catalog > Exhaust & Mufflers > Bus, 1979, & Aircooled Vanagon (80-83)
52 products found
SUBCATEGORIES:
Custom Stock
Sort By:
1 2
Vintage Speed Stainless Steel Headers, 1 5/8" (43mm) EQUAL LENGTH, Type 4 Engine In Baywindow Bus (T2), Square Exhaust Ports, 155-208-43ECU
Vintage Speed Stainless Steel Headers, 1 5/8" (43mm) EQUAL LENGTH, Type 4 Engine In Baywindow Bus (T2), Square Exhaust Ports, 155-208-43ECU
Price: $919.95

Vintage Speed Stainless Steel Headers, 1 5/8" (43mm) EQUAL LENGTH, Type 4 Engine In Baywindow Bus (T2), Square Exhaust Ports, 155-208-43ECU fix the unequal length tubing issue present in stock heater boxes! If you aren't using the heat, why add weight? These are JUST the headers to allow your type 4 engine to properly breathe out the exhaust! Equal length tubing is most efficient! Type 4 engines are horribly restricted, until now! These will allow you to run a 1.7 muffler, or one of the Vintage Speed Sport mufflers, or the Super Flow mufflers. more info
Vintage Speed Stainless Steel Equal Length Headers, 1 5/8" (43mm), Type 4 Engine, Oval Exhaust Ports, 155-208-43ECJ
Vintage Speed Stainless Steel Equal Length Headers, 1 5/8" (43mm), Type 4 Engine, Oval Exhaust Ports, 155-208-43ECJ
Price: $919.95

Vintage Speed Stainless Steel Equal Length Headers, 1 5/8" (43mm), Type 4 Engine, Oval Exhaust Ports, 155-208-43ECJ are JUST the headers to allow your type 4 engine to properly breathe out the exhaust! Replaced heater boxes and spaghetti mess! Type 4 engines are horribly restricted, until now! These will allow you to run a 1.7 muffler, or one of the Vintage Speed Sport mufflers, or the Super Flow mufflers. more info
Vintage Speed Stainless Steel Muffler, Type 4 Engine in Aircooled Vanagon (T3), 155-208-035SF-V
Vintage Speed Stainless Steel Muffler, Type 4 Engine in Aircooled Vanagon (T3), 155-208-035SF-V
Price: $649.95

Vintage Speed Stainless Steel Muffler, Type 4 Engine in Aircooled Vanagon (T3), 155-208-035SF-V is the finest exhaust available for your Aircooled VW Vanagon, exiting tightly against the body work for maximum ground clearance! more info
Vintage Speed Stainless Steel Headers, 1 5/8" (43mm), Type 4 Engine Into Bay Window Bus (T2), Square Exhaust Ports, 155-208-43SCU
Vintage Speed Stainless Steel Headers, 1 5/8" (43mm), Type 4 Engine 72-79 Bus (T2) or 80-83 Vanagon, Square Exhaust Ports, 155-208-43SCU
Price: $624.95

Vintage Speed Stainless Steel Headers, 1 5/8" (43mm), Type 4 Engine 72-79 Bus (T2) or 80-83 Vanagon, Square Exhaust Ports, 155-208-43SCU are JUST the headers to get rid of those heavy heat exchangers, and allow your type 4 engine to properly breathe out the exhaust! Un-equal length tubing is a lot less money than the equal length version of this part!

Type 4 engines are horribly restricted, until now! These will work with your stock muffler, or any of the other Bay Window compatible headers we sell. This header is built from 100% #304 stainless steel, the whole thing! Tubing, flanges, everything, TOP NOTCH!
more info
Vintage Speed Stainless Steel Muffler, Type 4 Engine in Vanagon (T3), 125hp rated, 155-208-R3500-V
Vintage Speed Stainless Steel MUFFLER, Type 4 Engine in Vanagon (T3), 125hp rated, 155-208-R3500-V
Price: $604.95

Vintage Speed Stainless Steel Muffler, Type 4 Engine in Vanagon (T3), 125hp rated, 155-208-R3500-V is the finest exhaust available for your Aircooled VW Vanagon. Tailpipe exits on the right, this replaces the stock muffler for an easy upgrade! more info
Vintage Speed Stainless Steel Headers, 1 5/8" (43mm), for Type 4 Engine in 73-79 Bus AND in 68-74 411 & 412, Oval Exhaust Ports, 155-208-43SCJ
Vintage Speed Stainless Steel Headers, 1 5/8" (43mm), for Type 4 Engine in 73-79 Bus AND in 68-74 411 & 412, Oval Exhaust Ports, 155-208-42SCJ
Price: $544.95

Vintage Speed Stainless Steel Headers, 1 5/8" (43mm), for Type 4 Engine in 73-79 Bus AND in 68-74 411 & 412, Oval Exhaust Ports, 155-208-43SCJ are JUST the headers to allow your type 4 engine to properly breathe out the exhaust! Replaced heater boxes and spaghetti mess! Type 4 engines are horribly restricted, until now! These will allow you to run a 1.7 muffler, or one of the Vintage Speed Sport mufflers, or the Super Flow mufflers. more info
Stainless Steel 1 1/2" Header and Quiet Pack Muffler, 1972-74 Bus & 1980-83 Vanagon, 3771
Stainless Steel 1 1/2" Header and Quiet Pack Muffler, 1972-74 Bus & 1980-83 Vanagon, 3771
Price: $499.95

Stainless Steel 1 1/2" Header and Quiet Pack Muffler, 1972-74 Bus & 1980-83 Vanagon, 3771 with the trapezoidal heater box flanges with 2 pipes and 3 bolts on either side. Comes with both the header and muffler, SS lasts a long time too! more info
Heater Box (Heat Exchanger), Left, 1978 1/2-79 Type 2 (Square Exhaust Port Type 4 Engine), 039-256-091C
Heater Box (Heat Exchanger), Left, 1978 1/2-79 Type 2 (Square Exhaust Port Type 4 Engine), 039-256-091C
Price: $369.95

Heater Box (Heat Exchanger), Left, 1978 1/2-79 Type 2 (Square Exhaust Port Type 4 Engine), 039-256-091C is a combination exhaust manifold and heat exchanger in one unit! This is hard to find, only fitting a year and a half of bus production! more info
Heater Box (Heat Exchanger), Right, 1978 1/2-79 Type 2 (Square Exhaust Port Type 4 Engine), 039-256-092C
Heater Box (Heat Exchanger), Right, 1978 1/2-79 Type 2 (Square Exhaust Port Type 4 Engine), 039-256-092C
Price: $369.95

Heater Box (Heat Exchanger), Right, 1978 1/2-79 Type 2 (Square Exhaust Port Type 4 Engine), 039-256-092C is a combination exhaust manifold and heat exchanger in one unit! This is hard to find, only fitting a year and a half of bus production! more info
Heater Box (Heat Exchanger), Right, 1980-83 1/2 Type 2 (with Type 4 Engine), 071-256-092
Heater Box (Heat Exchanger), Right, 1980-83 1/2 Type 2 (with Type 4 Engine), 071-256-092
Price: $329.95

Heater Box (Heat Exchanger), Right, 1980-83 1/2 Type 2 (with Type 4 Engine), 071-256-092 is a complete heater box that is separate from the exhaust manifold. These use a 3 bolt flange in a trapazoidal shape which encircles the 2 exhaust pipes. more info
Heater Box (Heat Exchanger), Left, 1980-83 1/2 Type 2 (with Type 4 Engine), 071-256-091
Heater Box (Heat Exchanger), Left, 1980-83 1/2 Type 2 (with Type 4 Engine), 071-256-091
Price: $329.95

Heater Box (Heat Exchanger), Left, 1980-83 1/2 Type 2 (with Type 4 Engine), 071-256-091 is a complete heater box that is separate from the exhaust manifold. These use a 3 bolt flange in a trapazoidal shape which encircles the 2 exhaust pipes. more info
Catalytic Converter, 1983-91 VW Vanagon, 11 3/4" Long, 025-131-701
Catalytic Converter, 1983-91 VW Vanagon, 11 3/4" Long, 025-131-701
Price: $169.95

Catalytic Converter, 1983-91 VW Vanagon, 11 3/4" Long, 025-131-701 replaced your stock catalytic converter that is clogged, has fallen apart, or that is ineffective due to contamination. A new Cat will really drop emissions at the Sniffer Station! This comes with a bung for the stock O2 sensor, some guys add a 2nd one for use with their Wideband for engine tuning. more info
Heater Control Box, Right, 1975-79 Type 1, and 1972-79 Type 2 (with Type 4 Engine), 021-256-206K
Heater Control Box, Right, 1975-79 Type 1, and 1972-79 Type 2 (with Type 4 Engine), 021-256-206K
Price: $129.95

Heater Control Box, Right, 1975-79 Type 1, and 1972-79 Type 2 (with Type 4 Engine), 021-256-206K is the flapper assembly that turns the air on and off, so you can modulate the cabin temperatures in your beloved car! These rust out or sieze when bad. more info
Heater Control Box, Left, 1975-79 Type 1, and 1972-79 Type 2 (with Type 4 Engine), 021-256-205K
Heater Control Box, Left, 1975-79 Type 1, and 1972-79 Type 2 (with Type 4 Engine), 021-256-205K
Price: $129.95

Heater Control Box, Left, 1975-79 Type 1, and 1972-79 Type 2 (with Type 4 Engine), 021-256-205K is the flapper assembly that turns the air on and off, so you can modulate the cabin temperatures in your beloved car! These rust out or sieze when bad. more info
Heater Control Box, Right, 1980-83 1/2 Type 2 (with Type 4 Engine), 071-256-206A
Heater Control Box, Right, 1980-83 1/2 Type 2 (with Type 4 Engine), 071-256-206A
Price: $124.95

Heater Control Box, Right, 1980-83 1/2 Type 2 (with Type 4 Engine), 071-256-206A is the flapper assembly that turns the air on and off, so you can modulate the cabin temperatures in your beloved car! These rust out or sieze when bad. more info
Heater Control Box, Left, 1980-83 1/2 Type 2 (with Type 4 Engine), 071-256-205A
Heater Control Box, Left, 1980-83 1/2 Type 2 (with Type 4 Engine), 071-256-205A
Price: $124.95

Heater Control Box, Left, 1980-83 1/2 Type 2 (with Type 4 Engine), 071-256-205A is the flapper assembly that turns the air on and off, so you can modulate the cabin temperatures in your beloved car! These rust out or sieze when bad. more info
Glass Pack Muffler for 2086-10 (72-74 & 80-83 Header)
GlassPack Muffler for 2086-10 (72-74 & 80-83 Header)
Price: $59.95

Single Glass mufflers has a distinctive, louder than stock tone, with great ground clearance and performance. This Single Glass Pack is compatible with the 2086-10 header, but has been discontinued. This is the last one we have! more info
Tail Pipe, 3 Bolt, 1972-79 Type 2 (With Type 4 Engine), 021-251-185F
Tail Pipe, 3 Bolt, 1972-79 Type 2 (With Type 4 Engine), 021-251-185F
Price: $39.95
SALE ITEM! use code TOOMANY30

Tail Pipe, 3 Bolt, 1972-79 Type 2 (With Type 4 Engine), 021-251-185F are often rusted out or bent from backing into stuff. These are a good idea to replace during a muffler change. Don't forget the 3 bolt gasket too! more info
Muffler Installation Kit, Fits 1.7 and 1.8L Type 4 Engines, AND 1980-83 1/2 Vanagon Engines
Muffler Installation Kit, Fits 1.7 and 1.8L Type 4 Engines, AND 1980-83 1/2 Vanagon Engines
Price: $19.95
Item eligible for Econo/1st Class Mail shipment, min ship charge applies

Muffler Installation Kit, Fits 1.7 and 1.8L Type 4 Engines, AND 1980-83 1/2 Vanagon Engines is a kit which has (2) metal laminated exhaust gaskets, (6) 8mm Studs, and (6) 8mm Nuts! This puts everything in one easy kit for your exhaust needs!

These metal gaskets are a LOT sturdier than the fibrous ones, but they are worth the extra cost! They are nice to have in the toolbox for those exhaust leaks that do pop up from time to time.
more info
O2 Sensor Bung and Plug, Stainless Steel (18 x 1.5mm Threads)
O2 Sensor Bung and Plug, Stainless Steel (18 x 1.5mm Threads)
Price: $16.95

O2 Sensor Bung and Plug, Stainless Steel (18 x 1.5mm Threads) is designed for you to weld to your exhaust system to repair or install an O2 sensor to FI closed loop operation, or for detailed wideband tuning. Stainless Steel for SS exhausts! more info
13mm Curved Wrench (S-wrench)
13mm Curved Wrench (S-wrench)
Price: $14.95

13mm Curved Wrench (S-wrench) is the perfect tool for removing and installing stock VW Bug carburetors, or working on pesky heater boxes and exhaust systems! This tool curves around obstructions to make the first loosen, or final tighten a breeze! This tool is a must in every VW Enthusiast's Tool Box. more info
O2 Sensor Bung and Plug, Mild Steel (18 x 1.5mm Threads)
O2 Sensor Bung and Plug, Mild Steel (18 x 1.5mm Threads)
Price: $14.95

O2 Sensor Bung and Plug, Mild Steel (18 x 1.5mm Threads) is designed for you to weld to your exhaust system to repair or install an O2 sensor to FI closed loop operation, or for detailed wideband tuning. more info
18" Long Heater Hose, Black Cardboard, 60mm ID, EACH, 211-261-236
18" Long Heater Hose, Black Cardboard, 60mm ID, EACH, 211-261-236
Price: $13.95

18" Long Heater Hose, Black Cardboard, 60mm ID, EACH, 211-261-236 is the flexible black heater hose which runs from your heater fan to your heater boxes. These are more durable than the silver hoses, and hide oil and dirt very well. Hard to find 60mm! more info
12 Point Engine Nuts, 8 x 1.25mm Thread, Set of 8, 4101-10
12 Point Engine Nuts, 8 x 1.25mm Thread, Set of 8, 4101-10
Price: $12.95
SALE ITEM! use code TOOMANY30

12 Point Engine Nuts, 8 x 1.25mm Thread, Set of 8, 4101-10 are a great looking 12pt black finished nut to set off your engine. Precision made from a hard steel, the 12pt 10mm head gives extra grip with 12pt sockets so they don't round off. These have a 8 x 1.25mm thread to fit your intake and exhaust studs, for easier installation and removal of dual carb systems, and performance exhausts. more info
8 x 9 x 56mm Stud (1.25mm Pitch), Step Stud, EACH, N146841
8 x 9 x 56mm Stud (1.25mm Pitch), Step Stud, EACH, N146841
Price: $9.95
Item eligible for Econo/1st Class Mail shipment, min ship charge applies

8 x 9 x 56mm Stud (1.25mm Pitch), Step Stud, EACH, N146841 are used on the cylinder head of the 1.8 and 2.0L Type 4 engine. Very tough to find, and do need to be replaced periodically from rust and corrosion. more info
Permatex Ultra Copper RTV Sealant (Silicone), 3oz Tube
Permatex Ultra Copper RTV Sealant (Silicone), 3oz Tube
Price: $9.95

Permatex Ultra Copper RTV Sealant (Silicone), 3oz Tube is an excellent sealant for cylinder bases, and cylinder shims. Wipe on a thin coat, let it skin up then install the parts. Also great for valve cover gaskets, oil strainer and generator stand gaskets, etc. Permatex makes several different formulations of RTV, we only carry 2 of them because these 2 cover all applications that we need for our Vintage VWs.

The COPPER is the best for high heat applications, like exhaust systems. If you don't want to use a gasket (or can't get one fast enough), just wipe a skim coat of the Copper on, and let it skin up, then assemble the parts. It will also seal up some unevenness in the flanges, or other situations that can create exhaust leaks.

The GRAY is the most oil resistant of the Permatex RTV Line. So it's best used for any area that will get exposed to engine oil or grease. Cylinder bases, oil pump base gaskets, oil strainer gaskets, valve cover gaskets, generator stand gaskets, etc.

Both are a must to have in the toolbox!

more info
Heater Hose Sleeve, 1968-79 Type 1, 1968-79 Type 2, Each, 111-819-945
Heater Hose Sleeve, 1968-79 Type 1, 1968-79 Type 2, EACH, 111-819-945
Price: $9.95

Heater Hose Sleeve, 1968-79 Type 1, 1968-79 Type 2, Each, 111-819-945 connects the flexible heater hose to the engine, another layer to prevent critical heater air leakage. This product is not available new, we have sourced these good USED ones so you can seal up your heater! more info
O2 Sensor BUNG (only), Stainless Steel
Stainless Steel O2 BUNG (only)
Price: $8.95

more info
Barrel Clamp, Accelerator Cable and Heater Box Cable, Flat Blade Head, 8 x 12mm, Pack of 5 Clamps, 311-129-777
Barrel Clamp, Accelerator Cable and Heater Box Cable, Flat Blade Head, 8 x 12mm, Pack of 5 Clamps, 311-129-777
Price: $6.95
Item eligible for Econo/1st Class Mail shipment, min ship charge applies

Barrel Clamp, Accelerator Cable and Heater Box Cable, Flat Blade Head, 8 x 12mm, Pack of 5 Clamps, 311-129-777 is used at the stock carburetor to throttle cable, and at the heater cable to heater box lever. These often get lost or damaged, having spares is a good idea! This version with the flat blade head is preferred by many because they can quickly tighten or loosen it with a screwdriver, instead of finding that pesky 8mm wrench! more info
Barrel Clamp HEX head, Accelerator Cable and Heater Box Cable, 8 x 12mm, Pack of 5, 111-129-921
Barrel Clamp HEX head, for Accelerator Cable and Heater Box Cable, 8 x 12mm, Pack of 5, 111-129-921
Price: $6.95

Barrel Clamp, Accelerator Cable and Heater Box Cable, 8 x 12mm, Pack of 5, 111-129-921 are used at the stock carburetor to throttle cable, and at the heater cable to heater box lever. These often get lost or damaged, having spares is a good idea! more info
O2 Sensor Plug, Mild Steel (18 x 1.5mm Threads)
O2 Sensor Plug, Mild Steel (18 x 1.5mm Threads)
Price: $5.95

O2 Sensor Plug, Mild Steel (18 x 1.5mm Threads) is designed for you to plug the threaded bung up when you don't have the O2 sensor installed for whatever reason (IE: You are finished tuning). You can save wear/tear on the O2 sensor by saving it! more info
3 Bolt Metal Exhaust Gasket, Trapezoidal Shaped, 1972-74 Bus AND 1980-83 Vanagon, EACH, 025-251-261
3 Bolt Metal Exhaust Gasket, Trapezoidal Shaped, 1972-74 Bus AND 1980-83 Vanagon, EACH, 025-251-261
Price: $5.95
Item eligible for Econo/1st Class Mail shipment, min ship charge applies

3 Bolt Metal Exhaust Gasket, Trapezoidal Shaped, 1972-74 Bus AND 1980-83 Vanagon, EACH, 025-251-261 go immediately before the stock muffler, or before aftermarket headers. Replace these when the exhaust is apart! You need two (2) to do one exhaust.

These metal ones are a LOT sturdier than the fibrous ones, but they are worth the extra cost! They are nice to have in the toolbox for those exhaust leaks that do pop up from time to time.
more info
3 Bolt Exhaust Gasket, Various Type 2 Locations, EACH, 021-251-235
3 Bolt Exhaust Gasket, Fibrous, for Various Type 2 Locations, EACH, 021-251-235
Price: $4.95
Item eligible for Econo/1st Class Mail shipment, min ship charge applies

3 Bolt Exhaust Gasket, Various Type 2 Locations, EACH, 021-251-235 is a fibrous gasket, great quality. Replace these when the exhaust is apart! These go between the muffler and tailpipe, and the catalytic converter. These often blow out, or need to be replaced when replacing your muffler, tailpipe, exhaust parts, or catalytic converter. These are nice to have in the toolbox for those exhaust leaks that do pop up from time to time. more info
Exhaust Gasket (Exhaust Manifold Gasket; Heater Box Gasket), Between Cylinder Head and Heater Box, 1979 1/2 - 80 Bus (Type 4 Engine), and 1980-83 1/2 Vanagon, Cylinders 1 & 4, EACH, 029-256-251
Exhaust Gasket (Exhaust Manifold Gasket; Heater Box Gasket), Between Cylinder Head and Heater Box, 1979 1/2 - 80 Bus (Type 4 Engine), and 1980-83 1/2 Vanagon, Cylinders 1 & 4, EACH, 029-256-251
Price: $4.95

Exhaust Gasket (Exhaust Manifold Gasket; Heater Box Gasket), Between Cylinder Head and Heater Box, 1979 1/2 - 80 Bus (Type 4 Engine), and 1980-83 1/2 Vanagon, Cylinders 1 & 4, EACH, 029-256-251 should be replaced whenever the heater boxes are off the engine! You need 2 of these per engine, these fit cylinders 1 and 4. more info
Exhaust Gasket (Exhaust Manifold Gasket; Heater Box Gasket), Between Cylinder Head and Heater Box, 1979 1/2 - 80 Bus (Type 4 Engine), and 1980-83 1/2 Vanagon, Cylinders 2 & 3, EACH, 029-256-252
Exhaust Gasket (Exhaust Manifold Gasket; Heater Box Gasket), Between Cylinder Head and Heater Box, 1979 1/2 - 80 Bus (Type 4 Engine), and 1980-83 1/2 Vanagon, Cylinders 2 & 3, EACH, 029-256-252
Price: $4.95

Exhaust Gasket (Exhaust Manifold Gasket; Heater Box Gasket), Between Cylinder Head and Heater Box, 1979 1/2 - 80 Bus (Type 4 Engine), and 1980-83 1/2 Vanagon, Cylinders 2 & 3, EACH, 029-256-252 should be replaced whenever the heater boxes are off the engine! You need 2 of these per engine, these fit cylinders 2 and 3. more info
Fiber Header Gaskets, 1972-74 Bus & 1980-83 Vanagon, Pair
Fiber Header Gaskets, 1972-74 Bus & 1980-83 Vanagon, PAIR
Price: $3.95

These precision die cut heat resistant fibrous exhaust gaskets fit the 2 pipe trapezoidal shaped flange with 3 bolts. Price is for a pair of gaskets to do one engine. more info
3 Bolt Exhaust Gasket, Various Type 2 Locations, EACH, 025-251-235
Tailpipe Gasket, for VANAGON (83-91) EACH, 025-251-235
Price: $3.95
Item eligible for Econo/1st Class Mail shipment, min ship charge applies

3 Bolt Exhaust Gasket, Various Type 2 Locations, EACH, 025-251-235 is a fibrous gasket, great quality. Replace these when the exhaust is apart! These go between the muffler and tailpipe, and the catalytic converter. These often blow out, or need to be replaced when replacing your muffler, tailpipe, exhaust parts, or catalytic converter. These are nice to have in the toolbox for those exhaust leaks that do pop up from time to time. more info
Exhaust Flange Gasket, 1 7/16" (36mm) Bolt Spacing, Waterboxer Engines, N90131602
Exhaust Flange Gasket, 1 7/16" (36mm) Bolt Spacing, Waterboxer Engines, N90131602
Price: $2.95

Exhaust Flange Gasket, 1 7/16" (36mm) Bolt Spacing, Waterboxer Engines, N90131602 are the highest quality gaskets you can get, consisting of both a metal and a fibrous layer. Nice to have in the toolbox for exhaust blowouts! Nice to have in the toolbox for exhaust blowouts! A lot of knowledgeable VW enthusiasts use these metal reinforced ones instead of the stock gaskets, they are much less likely to leak or blow out than the stock beetle gaskets! Some guys even re-use them time and time again, since they keep working without leaks! Gasket hole measures 1-7/16" (36mm).

more info
Racing Intake & Exhaust Header Nut, 11 x 8mm, EACH
Racing Intake & Exhaust Header Nut, 11 x 8mm, per EACH
Price: $1.50

Racing Intake & Exhaust Header Nut, 11 x 8mm, EACH are improved compared to the original Brass 11 x 8mm Racing Nuts, these are steel!

11 x 8mm nuts allow easier access to loosen and tighten your heater boxes or header to your engine, especially when you have larger than stock headers! Normally 13mm nuts infringe on your "wrench room" and make tightening and loosening a pain! You can also use these for your intake manifolds for more room! When using these nuts you can get a socket and a couple "wobbly extensions" run down from above for a FAST R&R. WHY DIDN'T YOU HAVE THESE BEFORE? LOL

Price is PER NUT!

more info
Barrel Clamp, Accelerator Cable and Heater Box Cable, 8 x 12mm, EACH, 111-129-921-311-129-777
Barrel Clamp HEX head, for Accelerator Cable and Heater Box Cable, 8 x 12mm, EACH, 111-129-921-311-129-777
Price: $1.50
Item eligible for Econo/1st Class Mail shipment, min ship charge applies

Barrel Clamp, Accelerator Cable and Heater Box Cable, 8 x 12mm, EACH, 111-129-921-311-129-777 are used at the stock carburetor to throttle cable, and at the heater cable to heater box lever. These often get lost or damaged, having spares is a good idea! more info
Barrel Clamp, Accelerator Cable and Heater Box Cable, Flat Blade Head, 8 x 12mm, 311-129-777
Barrel Clamp, Accelerator Cable and Heater Box Cable, Flat Blade Head, 8 x 12mm, 311-129-777
Price: $1.50
Item eligible for Econo/1st Class Mail shipment, min ship charge applies

Barrel Clamp, Accelerator Cable and Heater Box Cable, Flat Blade Head, 8 x 12mm, 311-129-777 is used at the stock carburetor to throttle cable, and at the heater cable to heater box lever. These often get lost or damaged, having spares is a good idea! This version with the flat blade head is preferred by many because they can quickly tighten or loosen it with a screwdriver, instead of finding that pesky 8mm wrench! more info
Hex Bolt, 8 X 1.25 X 65mm, Half Thread, EACH
Hex Bolt, 8 X 1.25 X 65mm, Half Thread, EACH
Price: $0.95

Hex Bolt, 8 X 1.25 X 65mm, Half Thread, EACH more info
ACN Flanged Racing Intake and Exhaust Nut, 8 x 10mm, EACH
ACN Flanged Racing Intake and Exhaust Nut, 8 x 10mm, EACH
Price: $0.95

ACN Flanged Racing Intake and Exhaust Nut, 8 x 10mm, EACH were designed after evaluating all problems with other nuts. We tried to solve them all with this product! 8mm threads, with a 10mm 6pt hex, and a 13mm flanged bottom to spread the clamping forces! You can torque these to 35lb/ft, though we feel that is excessive. The threads fail at just over 40lb/ft. We have tried these in several different alloys (including Stainless Steel) and success with one combination was the one we used!

Once you use these you will never EVER go back to the Brass Nuts (that strip and round off), or the barely better 12mm ones out there.

These are a LOT smaller than 11mm on the Head, and the flange keeps the header far enough away from the nut to allow your socket or wrench head enough room to get on and off!

We use these all over because they are so useful. The obvious application is header nuts, when you have a larger than stock header. These even work on exhausts as big as 2 1/4"!!!!! The not so obvious application are to hold down your intake manifold(s)! Now you have a ton of room to use a FAST Ratchet with a long extension above the carb top! You can take a dual carb system off in under a minute after a little practice! Imagine, no more bloody knuckles after an hour of fighting your car!!!!

more info
Exhaust Flange Gasket, 40hp-1600cc, 111-251-261B
Exhaust Flange Gasket, 40hp-1600cc, EACH 111-251-261B
Price: $0.80
Item eligible for Econo/1st Class Mail shipment, min ship charge applies

Exhaust Flange Gasket, 40hp-1600cc, 111-251-261B fits all 40hp and newer T1 based engines, and also waterboxer engines. These are 3 piece gaskets, 2 thin pieces of metal sandwiching a fibrous layer. Nice to have in the toolbox for exhaust blowouts!

more info
Hex Bolt, 8 X 1.25 X 60mm, Half Thread, EACH
Hex Bolt, 8 X 1.25 X 60mm, Half Thread, EACH
Price: $0.75

Hex Bolt, 8 X 1.25 X 60mm, Half Thread, EACH is used for mounting seats on risers, etc. These are a little longer than most bolts you have lying around, so will aid with bolting parts together, using spacers or risers. Nice to have in the garage! more info
Hex Bolt, 8 X 1.25 X 55mm, Half Thread, EACH, N103522
Hex Bolt, 8 X 1.25 X 55mm, Half Thread, EACH, N103522
Price: $0.75

Hex Bolt, 8 X 1.25 X 55mm, Half Thread, EACH, N103522 is used for mounting seats on risers, etc. These are a little longer than most bolts you have lying around, so will aid with bolting parts together, using spacers or risers. Nice to have in the garage! more info
Hex Bolt, 8 X 1.25 X 35mm, Full Thread, Class 8.8, EACH, N102473
Hex Bolt, 8 X 1.25 X 35mm, Full Thread, Class 8.8, EACH, N102473
Price: $0.50

Hex Bolt, 8 X 1.25 X 35mm, Full Thread, Class 8.8, EACH, N102473 can be used for applications like bolting exhaust flanges together. They are a little longer than most bolts you have lying around, so will aid with flanges that "aren't cooperating". Nice to have in the garage! more info
Wavy Washer, 10mm, EACH, N122306
10mm Wavy Sprung Washer (Lock Washer), N122306, per EACH - 10mm ID x 20mm OD
Price: $0.40
Item eligible for Econo/1st Class Mail shipment, min ship charge applies

Wavy Washer, 10mm, EACH, N122306 more info
Wavy Washer (Lock Washer), 7mm, EACH, N120131
7mm Wavy Sprung Washer (Lock Washer), N120131, per EACH - 7mm ID x 14mm OD
Price: $0.40
Item eligible for Econo/1st Class Mail shipment, min ship charge applies

Wavy Washer (Lock Washer), 7mm, EACH, N120131 more info
Wavy Washer (Lock Washer), 8 X 15mm, EACH, N122282
8mm Wavy Sprung Washer (Lock Washer), N122282, per EACH - 8mm ID X 15mm OD
Price: $0.40
Item eligible for Econo/1st Class Mail shipment, min ship charge applies

Wavy Washer (Lock Washer), 8 X 17mm, EACH, N122282 are the most commonly used washer on your VW! They are used all over the place, engine and elsewhere. It's a good ideal to have a lot of these lying around for those times you'll need them! more info
   
 
1 2