|
|
|
|
|
|
Hood or Decklid Seal Channel, Front or Rear, Beetle and Superbeetle, 111-813-311
|
|
|
Hood or Decklid Seal Channel, Front or Rear, Beetle and Superbeetle, 111-813-311, 3' Section, is the piece that your stock decklid seal or hood seal is crimped by. It is spot welded to the body and apron, and is lightly crimped onto the seal. Price is for one 3' section.
|
|
|
|
|
|
|
|
|
|
Front Hood Latch (Lock Carrier) with Push Button Pin, Upper (On Hood) , 1968 and Newer Beetle and Super Beetle, 111-823-507F
|
|
|
Front Hood Latch (Lock Carrier) with Push Button Pin, Upper (On Hood) , 1968 and Newer Beetle and Super Beetle, 111-823-507F is bolted on the under side of the hood, with bolts that thread into the hood handle. This goes into the Lower Hood Latch (catch), and keeps the hood closed properly!
|
|
|
|
|
|
|
|
|
|
Hood Latch Receiver, Lower On Apron, 1968 and Newer Beetle and Super Beetle, 111-813-509C
|
|
|
Hood Latch Receiver, Lower On Apron, 1968 and Newer Beetle and Super Beetle, 111-813-509C is riveted to the front apron. It has a tapered receiver and lock to retain the Upper Hood Latch that is bolted to the front hood. The hood cable releases the catch.
|
|
|
|
|
|
|
|
|
|
Chrome Hood Handle, for 1968 and Later Beetle and Super Beetle, 113-823-565F
|
|
|
Hood Handle, Chrome, 1968 and Later Beetle and Super Beetle, 113-823-565F sits on the outside of the hood, and the Front Hood Latch bolts into it from the underside of the front hood. There is a button for the Push Button to be depressed to release it.
|
|
|
|
|
|
|
|
|
|
Bumper Bracket, Front Left, 1968-73 VW Beetle and Super Beetle, 133-707-133AHD
|
|
|
Bumper Bracket, Front Left, 1968-73 VW Beetle and Super Beetle, 133-707-133AHD is a replacement bumper bracket for those tweaked and rusted original brackets! Most 40yo cars these have been hit and bent several times, they are cheap so replacement is wise
|
|
|
|
|
|
|
|
|
|
Bumper Bracket, Front Right, 1968-73 VW Beetle and Super Beetle, 133-707-134AHD
|
|
|
Bumper Bracket, Front Right 1968-73 VW Beetle and Super Beetle 133-707-134AHD is a replacement bumper bracket for those tweaked and rusted original brackets! Most 40yo cars these have been hit and bent several times, they are cheap so replacement is wise.
|
|
|
|
|
|
|
|
|
|
Bug Me Video How-to DVD, Volume 7 Heater Channel Replacement, by Rick Higgins
|
|
|
Volume 7: This video shows you how to replace VW heater channels, lower rear quarter panels and the lower front hinge pillar. Replacement is shown both with the body on AND off the chassis. Also includes installation of the convertible reinforcement rails. 100 minutes.
|
|
|
|
|
|
|
|
|
|
Strut Tower Section, Left Front, 1971-79 VW Super Beetle, 113-809-119
|
|
|
Strut Tower Section, Left Front, 1971-79 VW Super Beetle, 113-809-119 is used to replace all the body cancer that is often so common on your VW Super Beelte Strut Tower. This is a VERY IMPORTANT STRUCTURAL PIECE, it must be in good shape! This part requires welding to install.
|
|
|
|
|
|
|
|
|
|
Strut Tower Section, Right Front, 1971-79 VW Super Beetle, 113-809-120
|
Price: $32.95
SALE ITEM! use code TOOMANY30
|
|
|
Strut Tower Section, Right Front, 1971-79 VW Super Beetle, 113-809-120 is used to replace all the body cancer that is often so common on your VW Super Beelte Strut Tower. This is a VERY IMPORTANT STRUCTURAL PIECE, it must be in good shape! This part requires welding to install.
|
|
|
|
|
|
|
|
|
|
Chrome Steel T-bars, 1968-73 Beetle and Ghia, PAIR
|
|
|
Chrome plated Steel T-bars fit 1968-1973 Beetles and ghias. One pair does a front OR back of the car, you need 2 sets to do an entire car. These will really lighten your car and clean up the looks!
|
|
|
|
|
|
|
|
|
|
Front Hood Seal, Beetle and Superbeetle, Mexibeetle
|
|
|
This is the best hood seal available for your VW bug or super beetle. It slips on (without screws) to your deck lid, and the air-filled bubble-seal presses against the body of the car, for a leak-free seal. Even works if your normal seal channel is gone!MADE IN USA! This seal only wraps around the left, bottom, and right sides of your hood. The top nearest the windshield is NOT sealed by this seal, you must re-use your stock seal for the topmost portion of the hood/body area.
|
|
|
|
|
|
|
|
|
|
Front Firewall Inner Cross Panel Bracket, Left, 1971-79 Super Beetle (Sedan and Convertible), 133-805-401X
|
|
|
Front Firewall Inner Cross Panel Bracket, Left, 1971-79 Super Beetle (Sedan and Convertible), 133-805-401X is a critically important re-enforcement piece that is NOT present on the replacement firewall panel. This part needs to be welded in while you are doing the firewall!
This needs to be painted after welding! Made of die-formed and shaped heavy-gauge steel, and includes the cage nut for an easy and secure pan bolt installation
|
|
|
|
|
|
|
|
|
|
Front Firewall Inner Cross Panel Bracket, Right, 1971-79 Super Beetle (Sedan and Convertible), 133-805-402X
|
|
|
Front Firewall Inner Cross Panel Bracket, Right, 1971-79 Super Beetle (Sedan and Convertible), 133-805-402X is a critically important re-enforcement piece that is NOT present on the replacement firewall panel. This part needs to be welded in while you are doing the firewall!
This needs to be painted after welding! Made of die-formed and shaped heavy-gauge steel, and includes the cage nut for an easy and secure pan bolt installation
|
|
|
|
|
|
|
|
|
|
Front Wheelhouse, Front Section, Right Side, 1971-79 VW Super Beetle, 113-809-112B
|
Price: $49.95
SALE ITEM! use code TOOMANY30
|
|
|
Front Wheelhouse, Front Section, Right Side, 1971-79 VW Super Beetle, 113-809-112B is the panel the bumper bracket bolts to on the nose of the body. This has often been kinked and tweaked so many times that replacement is easier than repair, because this inner panels loses it's shape, strength and integrity. If this piece is not perfect it can make fender mounting and bumper hanging a challenge at best, and can make proper hood fit impossible! It's best to remove the front fender and have a good look under there. You might be able to save yours if you put a puller (winch or come along) with pressure while you tap out the creases and kinks, the nose WILL pull forward again! If yours is beyond hope you can use this part to rescue your baby. Front Apron Removal is necessary to install this part, as is welding.
|
|
|
|
|
|
|
|
|
|
Front Wheelhouse, Front Section, Left Side, 1971-79 VW Super Beetle, 113-809-111B
|
|
|
Front Wheelhouse, Front Section, Left Side, 1971-79 VW Super Beetle, 113-809-111B is the panel the bumper bracket bolts to on the nose of the body. This has often been kinked and tweaked so many times that replacement is easier than repair, because this inner panels loses it's shape, strength and integrity. If this piece is not perfect it can make fender mounting and bumper hanging a challenge at best, and can make proper hood fit impossible! It's best to remove the front fender and have a good look under there. You might be able to save yours if you put a puller (winch or come along) with pressure while you tap out the creases and kinks, the nose WILL pull forward again! If yours is beyond hope you can use this part to rescue your baby. Front Apron Removal is necessary to install this part, as is welding.
|
|
|
|
|
|
|
|
|
|
Conversion Bumper Brackets, 1967 and Earlier Bumpers on 1968-73 Std Beetle, Front, PAIR
|
|
|
Conversion Bumper Brackets, 1967 and Earlier Bumpers on 1968-73 Std Beetle, Front, Pair is a clever product to get rid of those big and ugly late bumpers, and go to a sleek early blade bumper, or even the early stock one with over riders! This does NOT fit Super Beetles.
|
|
|
|
|
|
|
|
|
|
|
Conversion Bumper Brackets, 1967 and Earlier Bumpers on 1968-73 Std Beetle, Rear, PAIR
|
|
|
Conversion Bumper Brackets, 1967 and Earlier Bumpers on 1968-73 Std Beetle, Rear, Pair is a clever product to get rid of those big and ugly late bumpers, and go to a sleek early blade bumper, or even the early stock one with over riders! These do NOT fit Super Beetles.
|
|
|
|
|
|
|
|
|
|
Super Beetle Front Apron, without Louvers, 111-805-591G
|
|
|
Super Beetle Front Apron, without Louvers, 111-805-591G is a great product for Super Beetle owners that are getting ready to paint their car. The ONLY useful reason for the vents is if your car has A/C. If not, those vents are TOUGH to prep for paint!
|
|
|
|
|
|
|
|
|
|
Aluminum T-Bar Set, 1968-73 Beetle and Ghia, Set of 4
|
|
|
Original Cal-Look T-bars are back in polished Aluminum! These fit "Late" 1968-73 Beetles and Ghias. One set does all 4 corners of your car in classic Cal-Look Style!. These will really lighten your car and clean up the looks!
|
|
|
|
|
|
|
|
|
|
Super Beetle Front Apron, with Louvers, 113-805-591A
|
|
|
Super Beetle Front Apron, with Louvers, 113-805-591A is a great product for Super Beetle owners that are getting ready to paint their car, because these are so often more trouble than they are worth to fix and straighten those vents!
|
|
|
|
|
|
|
|
|
|
Front Center Kick Panel (Front Firewall), 1971-79 Super Beetle (Sedan and Convertible), 111-805-451L
|
|
|
Front Center Kick Panel (Front Firewall), 1971-79 Super Beetle (Sedan and Convertible), 111-805-451L is the vertical panel immediately over the Tunnel Hump, in front of the pedal assembly. It runs from the base of the body up to the fuel tank support. This rusts out from water and salt from the front tires. Made of die-formed and shaped heavy-gauge primer-coated steel for protection against rust. Welding required!
|
|
|
|
|
|
|
|
|
|
Spare Tire Well, 1971-79 VW Super Beetle, 111-801-397C
|
|
|
Spare Tire Well, 1971-79 VW Super Beetle, 111-801-397C is a commonly rusted out panel on the Super Beetle. It rots from below, and most people don't even notice it unless they have removed their spare tire, which in many cases is not often! This panel requires welding to install.
|
|
|
|
