OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!


  VW Parts Catalog > Carbs & Fuel System >

Weber 40 IDF, Dellorto 40 DRLA, and Solex 40P11 DELUXE Carburetor Phenolic Spacer, 40mm ID, 1/4" (6.4mm) Thick, EACH
Weber 40 IDF, Dellorto 40 DRLA, and Solex 40P11 DELUXE Carburetor Phenolic Spacer, 40mm ID, 1/4" (6.4mm) Thick, EACH


 
Weber 40 IDF, Dellorto 40 DRLA, and Solex 40P11 DELUXE Carburetor Phenolic Spacer, 40mm ID, 1/4" (6.4mm) Thick, EACH keep intake manifold heat insulated from your carburetor(s), preventing vapor lock and fuel percolation after shut down.

These spacers must have a gasket above and below the spacer to seal. The 6mm spacers are good for 10F drop, the 9mm ones drop temps 20F!

We recommend you use a Raytek laser thermometer on your carburetors to measure their temperatures when hot. Anything over 150F needs to be cooled off!

These are 40mm ID for use on 40mm carburetors. You will need two (2) of these to do one carburetor!

IMPORTANT: Measure carefully for 2 things; that your existing carburetor studs are long enough for the thicker spacers, AND that you have room above the carburetor(s) for the height increase!
Price: $12.00


: 40MM-CARB-PHENOLIC-6MM


QTY:
Overview
 
Weber 40 IDF, Dellorto 40 DRLA, and Solex 40P11 DELUXE Carburetor Phenolic Spacer, 40mm ID, 1/4" (6.4mm) Thick, EACH keep intake manifold heat insulated from your carburetor(s), preventing vapor lock and fuel percolation after shut down.

These spacers must have a gasket above and below the spacer to seal. The 6mm spacers are good for 10F drop, the 9mm ones drop temps 20F!

These are 40mm ID for use on 40mm carburetors.

Related Items...
Weber 40 IDF, Dellorto 40 DRLA, and Solex 40P11 DELUXE Carburetor Base Gasket, 40mm ID, PAIR (To do ONE (1) Carburetor)
Price: $5.00
Weber 40 IDF, Dellorto 40 DRLA, and Solex 40P11 DELUXE Carburetor Base Gasket, 40mm ID, PAIR (To do ONE (1) Carburetor)

Share your thoughts on this product with other customers...
Click here to be the first to WRITE A PRODUCT REVIEW!