|
|
|
|
|
|
Bulb, Dome Light , 12V 10W, N177232
|
|
|
Bulb, Dome Light , 12V 10W, N177232 is the 6 volt bulb for Interior Dome Lights on all year and model of old VW. These are often bad and in need of replacement. Installation takes less than a minute, remove the light assembly and this slips right in! Price is for a single bulb.
|
|
|
|
|
|
|
|
|
|
Bulb, Dome Light , 6V 5W, N177251
|
|
|
Bulb, Dome Light , 6V 5W, N177251 is the 6 volt bulb for Interior Dome Lights on all year and model of old VW. These are often bad and in need of replacement. Installation takes less than a minute, remove the light assembly and this slips right in! Price is for a single bulb.
|
|
|
|
|
|
|
|
|
|
16 LED Dome Light Bulb, 12V, All Models
|
|
|
16 LED Dome Light Bulb, 12V, All Models is a fantastic upgrade for your car, it's easy to change, lasts forever, and inexpensive! This will easily double the light output of your dome light, and it draws next to 0 current, and won't get hot either! Crisp light is a stark contrast to the dull yellow hue that comes out of the stock bulb, even when getting good current and voltage. This is a new product for us, and we can't sing enough praise about it, they are that nice!These bulbs ARE polarity sensitive, but if you put it in backward it just won't light up. Flip it around and try again! It really is as easy as removing the stock dome light bulb, then putting this one in! Vanagon owners should get 3 for the 3 dome lights on those models.
|
|
|
|
|
|
|
|
|
|
Rubber Boot for Sealed Switch
|
|
|
Rubber Boot for Sealed Switch fits 3570, 3571, 3572, and 3573.
|
|
|
|
|
|
|
|
|
|
Dome Light Switch (On Door Jamb), 61-79 Type 1, 1968+ Type 2, 113-947-561E or 175-947-561
|
|
|
Dome Light Switch (On Door Jamb), 61-79 Type 1, 1968+ Type 2, 113-947-561E or 175-947-561 is the electrical switch that screws to the door jamb, and turns the dome light on and off as the door opens and closes. These are often bent or corroded.
|
|
|
|
|
|
|
|
|
|
RED Indicator Light, 1/2" Hole
|
|
|
This light has 2 push on prong ends to make it EZ to install in any 1/2" hole. Use this to indicate a warning light, turn signal, or even that something is on (fuel pump, ignition, tail lights, etc).
|
|
|
|
|
|
|
|
|
|
AMBER Indicator Light, 1/2" Hole
|
|
|
This light has 2 push on prong ends to make it EZ to install in any 1/2" hole. Use this to indicate a warning light, turn signal, or even that something is on (fuel pump, ignition, tail lights, etc).
|
|
|
|
|
|
|
|
|
|
BLUE Indicator Light, 1/2" Hole
|
|
|
This light has 2 push on prong ends to make it EZ to install in any 1/2" hole. Use this to indicate a warning light, turn signal, or even that something is on (fuel pump, ignition, tail lights, etc).
|
|
|
|
|
|
|
|
|
|
GREEN Indicator Light, 1/2" Hole
|
|
|
This light has 2 push on prong ends to make it EZ to install in any 1/2" hole. Use this to indicate a warning light, turn signal, or even that something is on (fuel pump, ignition, tail lights, etc).
|
|
|
|
|
|
|
|
|
|
Interior Light Lens (Dome Light Lens), 1955-67 Type 2, EACH, 211-947-125A-211-125A
|
|
|
Interior Light Lens (Dome Light Lens), 1955-67 Type 2, EACH, 211-947-125A-211-125A is the little plastic lens which provides a finished look to the light. You need 1 of these on Pickups, and 2 on Busses.
|
|
|
|
|
|
|
|
|
|
Interior Light Assembly (Dome Light), 1952-78 Type 1 Sedan, 1962-73 Type 3, and Porsche 914, 111-947-111E
|
|
|
Interior Light Assembly (Dome Light), 1952-78 Type 1 Sedan, 1962-73 Type 3, and Porsche 914, 111-947-111E is the little plastic assembly that clips into the headliner area above the Driver's Head. It provides interior light, when the switch is actually working! Bulb is NOT included!
|
|
|
|
|
|
|
|
|
|
Push Button Switch, Momentary ON
|
|
|
Push Button Momentary ON Switch. Spring loaded button is great for starter or even your horn! Comes complete with dust boot to ensure proper operation in off-road environments.
|
|
|
|
|
|
|
|
|
|
RED SUPER Indicator Light, 3/4" Hole
|
|
|
This light has 2 push on prong ends to make it EZ to install in any 3/4" hole. Large size is a "can't miss", so it's most commonly used as an "Oh #$*&#)* " indicator like Fan Belt or Oil Light!
|
|
|
|
|
|
|
|
|
|
GREEN SUPER Indicator Light, 3/4" Hole
|
|
|
This light has 2 push on prong ends to make it EZ to install in any 3/4" hole. Large size is a "can't miss", so it's most commonly used as an "Oh #$*&#)* " indicator like Fan Belt or Oil Light!
|
|
|
|
|
|
|
|
|
|
AMBER SUPER Indicator Light, 3/4" Hole
|
|
|
This light has 2 push on prong ends to make it EZ to install in any 3/4" hole. Large size is a "can't miss", so it's most commonly used as an "Oh #$*&#)* " indicator like Fan Belt or Oil Light!
|
|
|
|
|
|
|
|
|
|
BLUE SUPER Indicator Light, 3/4" Hole
|
|
|
This light has 2 push on prong ends to make it EZ to install in any 3/4" hole. Large size is a "can't miss", so it's most commonly used as an "Oh #$*&#)* " indicator like Fan Belt or Oil Light!
|
|
|
|
|
|
|
|
|
|
HD Sealed Switch, On-Off, 20 Amp
|
|
|
Sealed toggle switches feature dust and water resistant construction. These feature push on terminals, and a rubber toggle cover to keep $)#*&) out! 20A capable for most any application. Switch body is sealed for LIFE against moisture and dirt.
|
|
|
|
|
|
|
|
|
|
Switch Guard for Sealed Switch
|
|
|
Switch Guard for Sealed Switch fits 3570, 3571, 3572, and 3573.
|
|
|
|
|
|
|
|
|
|
HD Sealed Switch, On-Off-On, 20 Amp
|
|
|
Sealed toggle switches feature dust and water resistant construction. These feature push on terminals, and a rubber toggle cover to keep $)#*&) out! 20A capable for most any application. Switch body is sealed for LIFE against moisture and dirt.
|
|
|
|
|
|
|
|
|
|
HD Sealed Switch, Off-On-Momentary On, 20 Amp
|
|
|
Sealed toggle switches feature dust and water resistant construction. These feature push on terminals, and a rubber toggle cover to keep $)#*&) out! 20A capable for most any application. Switch body is sealed for LIFE against moisture and dirt.
|
|
|
|
|
|
|
|
|
|
HD Sealed Switch, Off-On-On, 20 Amp
|
|
|
Sealed toggle switches feature dust and water resistant construction. These feature push on terminals, and a rubber toggle cover to keep $)#*&) out! 20A capable for most any application. Switch body is sealed for LIFE against moisture and dirt.
|
|
|
|
|
|
|
|
|
|
Waterproof Accessory Socket, 12 Volt with Fuse, Low Profile
|
Price: $24.95
SALE ITEM! use code TOOMANY30
|
|
|
Waterproof Accessory Socket, 12 Volt with Fuse, Low Profile is a high quality part that we have tested on our own cars! So many of these are cheap junk, as usual we pre-screened this part so you get what you expect! 15A fuse and fuse holder is included! The 90 degree back side means you have a shallow mounting depth for those tight installation possibilities, like rear door panels!
|
|
|
|
|
|
|
|
|
|
Gaugebox/Switchbox, 4.50 X 6.50 X 4", Brushed Aluminum
|
|
|
These Aluminum Switchboxes provide a custom way to install gauges and/or switches into your car or buggy. Brushed aluminum finish LOOKS GREAT. This has (2) 3/4" Holes, and (4) 1/2" Holes for switches and warnign lights (No Gauges).
|
|
|
|
|
|
|
|
|
|
Gaugebox/Switchbox, 9.75 X 6.5 X 4", Brushed Aluminum, Undrilled
|
|
|
These Aluminum Switchboxes provide a custom way to install gauges and/or switches into your car or buggy. Brushed aluminum finish LOOKS GREAT. This one has a face that is undrilled for a custom setup the way YOU want it!
|
|
|
|
|
|
|
|
|
|
Quick Change Ratchet Wire Crimping Tool, 6 Pieces, T3001
|
|
|
Quick Change Ratchet Wire Crimping Tool, 6 Pieces, T3001 includes 5 Chrome Moly Zinc-plated Dies, Carbon Steel Ratchet Tool, and a hard plastic storage case. This is the best crimping tool we've ever used, it does insulated and non-insulated terminals, open barrel terminals, and even spark plug wires! Stop crimping wires with channel locks and vice-grips, and use a REAL WIRE CRIMPER! Terminal pulled out? Spark plug wire end keeps coming off? Need to shorten your coil wire? NO PROBLEM!
We use this wire crimper here at ACN, and after decades of using the cheap wire crimpers, we'll never go back!
|
|
|
|
|
|
|
|
|
|
Vintage Speed Dehne Digital Fuel Gauge (Reproduction), 155-721-30500
|
|
|
Vintage Speed Dehne Digital Fuel Gauge (Reproduction), 155-721-30500 is machined from 6061 aluminum, and designed to give your classic VWa modern look and feel while still retaining its Vintage "Bug" Style. This Dehne Fuel Gauge is 6 and 12 Volt compatible, and works Type 1 Electric Fuel Tank Sending Units, as well as with Karmann Ghia and Pre '73 Type 2 tubed tank sending units.
|
|
|
|
