|
|
|
|
|
|
Rubber Boot for Sealed Switch
|
|
|
Rubber Boot for Sealed Switch fits 3570, 3571, 3572, and 3573.
|
|
|
|
|
|
|
|
|
|
Speedometer SEAL, 1968-77 VW Beetle, 1971-72 Super Beetle, and 1973-74 THING, 113-957-375A
|
|
|
Speedometer SEAL, 1968-77 VW Beetle, 1971-72 Super Beetle, and 1973-74 THING, 113-957-375A seals the speedometer head against the dash board, so you don't have icy or hot air blowing around the speedometer, nor the dust which is carried with it! The 50yo seal is shot!
|
|
|
|
|
|
|
|
|
|
RED Indicator Light, 1/2" Hole
|
|
|
This light has 2 push on prong ends to make it EZ to install in any 1/2" hole. Use this to indicate a warning light, turn signal, or even that something is on (fuel pump, ignition, tail lights, etc).
|
|
|
|
|
|
|
|
|
|
AMBER Indicator Light, 1/2" Hole
|
|
|
This light has 2 push on prong ends to make it EZ to install in any 1/2" hole. Use this to indicate a warning light, turn signal, or even that something is on (fuel pump, ignition, tail lights, etc).
|
|
|
|
|
|
|
|
|
|
BLUE Indicator Light, 1/2" Hole
|
|
|
This light has 2 push on prong ends to make it EZ to install in any 1/2" hole. Use this to indicate a warning light, turn signal, or even that something is on (fuel pump, ignition, tail lights, etc).
|
|
|
|
|
|
|
|
|
|
GREEN Indicator Light, 1/2" Hole
|
|
|
This light has 2 push on prong ends to make it EZ to install in any 1/2" hole. Use this to indicate a warning light, turn signal, or even that something is on (fuel pump, ignition, tail lights, etc).
|
|
|
|
|
|
|
|
|
|
Innovate 1GB SD (Secure Digital) Memory Card for LM-2, 3787
|
|
|
Innovate 1GB SD (Secure Digital) Memory Card for LM-2, 3787 is the accessory you need to do internal Data-Logging in your LM-2. This card has been tested and approved for use, and allows for 700 HOURS of data logging!
|
|
|
|
|
|
|
|
|
|
Push Button Switch, Momentary ON
|
|
|
Push Button Momentary ON Switch. Spring loaded button is great for starter or even your horn! Comes complete with dust boot to ensure proper operation in off-road environments.
|
|
|
|
|
|
|
|
|
|
RED SUPER Indicator Light, 3/4" Hole
|
|
|
This light has 2 push on prong ends to make it EZ to install in any 3/4" hole. Large size is a "can't miss", so it's most commonly used as an "Oh #$*&#)* " indicator like Fan Belt or Oil Light!
|
|
|
|
|
|
|
|
|
|
GREEN SUPER Indicator Light, 3/4" Hole
|
|
|
This light has 2 push on prong ends to make it EZ to install in any 3/4" hole. Large size is a "can't miss", so it's most commonly used as an "Oh #$*&#)* " indicator like Fan Belt or Oil Light!
|
|
|
|
|
|
|
|
|
|
AMBER SUPER Indicator Light, 3/4" Hole
|
|
|
This light has 2 push on prong ends to make it EZ to install in any 3/4" hole. Large size is a "can't miss", so it's most commonly used as an "Oh #$*&#)* " indicator like Fan Belt or Oil Light!
|
|
|
|
|
|
|
|
|
|
BLUE SUPER Indicator Light, 3/4" Hole
|
|
|
This light has 2 push on prong ends to make it EZ to install in any 3/4" hole. Large size is a "can't miss", so it's most commonly used as an "Oh #$*&#)* " indicator like Fan Belt or Oil Light!
|
|
|
|
|
|
|
|
|
|
HD Sealed Switch, On-Off, 20 Amp
|
|
|
Sealed toggle switches feature dust and water resistant construction. These feature push on terminals, and a rubber toggle cover to keep $)#*&) out! 20A capable for most any application. Switch body is sealed for LIFE against moisture and dirt.
|
|
|
|
|
|
|
|
|
|
Switch Guard for Sealed Switch
|
|
|
Switch Guard for Sealed Switch fits 3570, 3571, 3572, and 3573.
|
|
|
|
|
|
|
|
|
|
HD Sealed Switch, On-Off-On, 20 Amp
|
|
|
Sealed toggle switches feature dust and water resistant construction. These feature push on terminals, and a rubber toggle cover to keep $)#*&) out! 20A capable for most any application. Switch body is sealed for LIFE against moisture and dirt.
|
|
|
|
|
|
|
|
|
|
HD Sealed Switch, Off-On-Momentary On, 20 Amp
|
|
|
Sealed toggle switches feature dust and water resistant construction. These feature push on terminals, and a rubber toggle cover to keep $)#*&) out! 20A capable for most any application. Switch body is sealed for LIFE against moisture and dirt.
|
|
|
|
|
|
|
|
|
|
HD Sealed Switch, Off-On-On, 20 Amp
|
|
|
Sealed toggle switches feature dust and water resistant construction. These feature push on terminals, and a rubber toggle cover to keep $)#*&) out! 20A capable for most any application. Switch body is sealed for LIFE against moisture and dirt.
|
|
|
|
|
|
|
|
|
|
Fuel Gauge Vibrator, 1968-79 Beetle and Super Beetle, 1974 Ghia, and 1973 1/2-79 Type 2, 113-957-099
|
|
|
Fuel Gauge Vibrator, 1968-79 Beetle and Super Beetle, 1974 Ghia, and 1973 1/2-79 Type 2, 113-957-099 stimulates the electrical fuel gauge. When the fuel gauge is not working, and it's not the sender, this is a common cause of the failure!
The vibrator reduces the electrical system's 12 volts to ~5
volts, so you don't burn out your fuel tank sender's rheostat. This voltage drop also keeps the tiny
wires in your gauge from burning out.
|
|
|
|
|
|
|
|
|
|
Molding for Dehne Fuel Gauge, 2 Pieces, 155-721-30688
|
|
|
Molding for Dehne Fuel Gauge, 2 Pieces, 155-721-30688 is the finishing touch for the installation of your Dehne Fuel Gauge into your Oval VW Beetle!
|
|
|
|
|
|
|
|
|
|
Stainless Steel Oil Pressure Sender Relocation Kit
|
|
|
Stainless Steel Oil Pressure Sender Relocation Kit is used to move your oil pressure sending unit around a foot away, usually due to an obstruction. This is commonly used on Type 4 engines, especially with larger distributors. This hose has Male Threads at one end, and Female Threads at the other, to relocate your Oil Pressure Sending Unit away from the obstruction.SS Braided hose won't leak or burst, and is self grounding. You will need to buy a P-Clamp to secure the loose end of the hose at your appropriate location. 1/8-27 threads will work fine in VWs and Porsche's. The threads are 10mm, but no adapter is available, we've been using 1/8 -27 for almost 30 years without issue.
|
|
|
|
|
|
|
|
|
|
Fuel Tank Sending Unit, Mechanical, 1962-67 Beetle and 1963-66 Ghia, 113-919-049C ECONO version
|
|
|
Fuel Tank Sending Unit, Mechanical, 1962-67 Beetle and 1963-66 Ghia, 113-919-049C is the mechanical sending unit that is held into the fuel tank with 5 screws. It moves the cable which runs to the gauge on the dashboard, indicating your fuel level. This does not include the gauge nor cable, it's just the tank mounted sender and float.
|
|
|
|
|
|
|
|
|
|
Mechanical Gauge Tubing Kit, 16'
|
|
|
VDO Tubing Kit is used with VDO's Turbo BOOST gauge, and VDO's Mechanical Oil Pressure Gauge. This kit makes the connection of your gauge to your engine a snap! 16' of tubing is supplied so you can do the installation on most any car.
|
|
|
|
|
|
|
|
|
|
Vintage Speed Stainless Steel Tachometer Stand, 3 3/8" Tachometer, Polished, LHD Cars, 155-691-10288
|
|
|
Vintage Speed Stainless Steel Tachometer Stand, 3 3/8" Tachometer, Polished, LHD Cars, 155-691-10288 cleanly mounts your tachometer to the dashboard of your early beetle, and also moves it to the left for easier viewing. Designed for metal (Painted) dash.
|
|
|
|
|
|
|
|
|
|
|
Vintage Speed Stainless Steel Tachometer Stand, 3 3/8" Tachometer, Polished, RHD Cars, 155-691-20288
|
|
|
Vintage Speed Stainless Steel Tachometer Stand, 3 3/8" Tachometer, Polished, RHD Cars, 155-691-20288 cleanly mounts your tachometer to the dashboard of your early beetle, and also moves it to the left for easier viewing. Designed for metal (Painted) dash.
|
|
|
|
|
|
|
|
|
|
VDO Dimmer Ring, 2 1/16" Gauge, PAIR
|
|
|
This is a matte black "Hood" that fits over the gauge face, to shield the gauge from sunlight, so it's easier to see the gauge face in bright sunlight.
|
|
|
|
|
|
|
|
|
|
|
Fuel Tank Sending Unit, Mechanical, 1962-67 Beetle and 1963-66 Ghia, 113-919-049C
|
|
|
Fuel Tank Sending Unit, Mechanical, 1962-67 Beetle and 1963-66 Ghia, 113-919-049C is the mechanical sending unit that is held into the fuel tank with 5 screws. It moves the cable which runs to the gauge on the dashboard, indicating your fuel level. This does not include the gauge nor cable, it's just the tank mounted sender and float.
|
|
|
|
|
|
|
|
|
|
Fuel Gauge (Inside Speedometer), Electrical, 1968-79 Beetle and Super Beetle, 113-957-063B
|
|
|
Fuel Gauge (Inside Speedometer), Electrical, 1968-79 Beetle and Super Beetle, 113-957-063B is the gauge inside the speedometer assembly. It's held in place by a couple small machine screws, and changing it is very easy!
|
|
|
|
|
|
|
|
|
|
Gaugebox/Switchbox, 4.50 X 6.50 X 4", Brushed Aluminum
|
|
|
These Aluminum Switchboxes provide a custom way to install gauges and/or switches into your car or buggy. Brushed aluminum finish LOOKS GREAT. This has (2) 3/4" Holes, and (4) 1/2" Holes for switches and warnign lights (No Gauges).
|
|
|
|
|
|
|
|
|
|
Dehne Fuel Gauge Bezel for 1958-67 LHD Type 1, 155-291-30100
|
|
|
Dehne Fuel Gauge Bezel for 1958-67 LHD Type 1, 155-291-30100 is the easy way to complete the installation of your Dehne Fuel Gauge into your 1958-67 LHD VW Beetle. This mounts the Dehne Fuel Gauge to immediately to the right of your Speedometer.
|
|
|
|
|
|
|
|
|
|
Dehne Fuel Gauge Bezel for 1958-67 RHD Type 1, 155-291-30300
|
|
|
Dehne Fuel Gauge Bezel for 1958-67 RHD Type 1, 155-291-30300 is the easy way to complete the installation of your Dehne Fuel Gauge into your 1958-67 LHD VW Beetle. This mounts the Dehne Fuel Gauge to immediately to the left of your Speedometer.
|
|
|
|
|
|
|
|
|
|
Dehne Fuel Gauge Ashtray Panel for RHD Oval Window VW Beetle, 155-291-30700
|
|
|
Dehne Fuel Gauge Ashtray Panel for RHD Oval Window VW Beetle, 155-291-30700 is the easy way to complete the installation of your Dehne Fuel Gauge into your RHD Oval VW Beetle.
|
|
|
|
|
|
|
|
|
|
Dehne Fuel Gauge Ashtray Panel for LHD Oval Window VW Beetle, 155-291-30400
|
|
|
Dehne Fuel Gauge Ashtray Panel for LHD Oval Window VW Beetle, 155-291-30400 is the easy way to complete the installation of your Dehne Fuel Gauge into your LHD Oval VW Beetle.
|
|
|
|
|
|
|
|
|
|
Oil Temperature Warning Dipstick, 235F Calibrated Alert, Upright Type 1 Engines
|
|
|
Oil Temperature Warning Dipstick, 235F Calibrated Alert, Upright Engines is an easy and inexpensive way to be alerted by overheated oil temperatures! At 225F the light will flicker, and at 235F the light goes on steady! There are several ways to wire this. The most common and easiest usage is to wire parallel with the stock oil pressure warning light (Green light on the dash). The kit comes with the wires and connectors to do this. If you want a nicer installation, you have to run a wire from the dash to the engine, and you can then use this wire to give you a visual (warning light), audio (warning buzzer), or both!This unit fits into the stock dipstick tube, replacing the stock dipstick. If you want an easy to install oil temperature gauge, this is it! This version fits upright Type 1 engines, which were in all Beetles and Ghias, as well as in Bus models up through the year 1971 (in North America). We have a different unit for Type 4 engines (which were in the later model Busses), and "Shorty" versions which are 1/8 NPT, typically custom install locations, or for installation at the Type 3 Oil Filler Block Off location on Universal Cases.
|
|
|
|
|
|
|
|
|
|
VDO Fuel Gauge, Cockpit, Black Face, 2 1/16", V301015
|
|
|
V301015 VDO Fuel Gauge, Cockpit, Black Face, 2 1/16" is compatible with VDO Sending Unit # V226001.
|
|
|
|
|
|
|
|
|
|
Fast FabTachometer Bracket, 1965-1977 Beetle with Defrost Vent (No Drilling)
|
|
|
Made in USA. This is the perfect way to add a tach to your 1965-1977 VW bug without cutting the dash up! This bracket bolts into the center defroster vent and positions the tach just right. Parts include all hardware and are sold in raw alloy finish.
|
|
|
|
|
|
|
|
|
|
Gaugebox/Switchbox, 9.75 X 6.5 X 4", Brushed Aluminum, Undrilled
|
|
|
These Aluminum Switchboxes provide a custom way to install gauges and/or switches into your car or buggy. Brushed aluminum finish LOOKS GREAT. This one has a face that is undrilled for a custom setup the way YOU want it!
|
|
|
|
|
|
|
|
|
|
VDO Fuel Gauge, Cockpit, Black Face, 2 1/16" (For V221012 or OEM Sender)
|
|
|
VDO Fuel Gauge, Cockpit, Black Face, 2 1/16" is compatible with VDO Sending Unit # V221012.
|
|
|
|
|
|
|
|
|
|
VDO 300F Oil Temp Gauge, Cockpit, Black Face, 2 1/16"
|
|
|
VDO 300F Oil Temp Gauge, Cockpit, Black Face, 2 1/16" fits all sorts of VW aircooled vehicles. It's a good idea to monitor oil temperature in our vehicles, temperatures exceeding 235F means something is wrong! We also recommend a MINIMUM temp of 180F.
|
|
|
|
|
|
|
|
|
|
VDO Voltmeter, Cockpit, Black Face, 2 1/16"
|
|
|
VDO Voltmeter, Cockpit, Black Face, 2 1/16" is more useful than an Ammeter for your VW bug, bus or ghia. Turn the key on and note the voltage, it should be ~12.8V (good battery). Start up the car, your voltage SHOULD go up as the charging system works.
|
|
|
|
|
|
|
|
|
|
VDO 150psi Oil Pressure Gauge, Cockpit, Black Face, 2 1/16"
|
|
|
VDO 150psi Oil Pressure Gauge, Cockpit, Black Face, 2 1/16" is used to monitor the ultra-critical oil pressure on VW beetles, ghias, and busses. We recommend 10psi/1k RPM as the benchmark, without exceeding 45psi hot pressure (which causes overheating)
|
|
|
|
|
|
|
|
|
|
Fast Fab Tachometer Bracket, 1953-1957 Beetles (Ovals)
|
|
|
These high quality tachometer brackets are made in. Designed to fit your oval windows dash perfectly and give that "old school" Cal-look that the traditional enthusiast loves. Bracket is sold in raw finish and includes all hardware and wiring grommet.
|
|
|
|
|
|
|
|
|
|
Oil Temperature Warning Dipstick, 235F Calibrated Alert, 1972-79 Type 4 Engines (Does NOT fit Vanagon Engine)
|
|
|
Oil Temperature Warning Dipstick, 235F Calibrated Alert, 1972-79 Type 4 Engines (Does NOT fit Vanagon Engine) is an easy and inexpensive way to be alerted by overheated oil temperatures! At 225F the light will flicker, and at 235F the light goes on steady! There are several ways to wire this. The most common and easiest usage is to wire parallel with the stock oil pressure warning light (Green light on the dash). The kit comes with the wires and connectors to do this. If you want a nicer installation, you have to run a wire from the dash to the engine, and you can then use this wire to give you a visual (warning light), audio (warning buzzer), or both!This unit fits into the stock dipstick tube, replacing the stock dipstick. If you want an easy to install oil temperature gauge, this is it! This version fits Type 4 engines, which include the 1972-79 Bus with the Type 4 Engines in North America. If you have an Upright Type 1 Engine, we have a different unit for those, and "Shorty" versions which are 1/8 NPT, typically custom install locations, or for installation at the Type 3 Oil Filler Block Off location on Universal Cases.
|
|
|
|
|
|
|
|
|
|
VDO Direct Mount Gauge, 15psi, 1 1/2" White Face, 1/8-27 NPT
|
|
|
VDO's direct mount low pressure gauge is nice for monitoring fuel pressure. Excessive fuel pressure causes fuel control problems, and insufficient pressure will create fuel starvation under driving conditions!
|
|
|
|
|
|
|
|
|
|
VDO Direct Mount Gauge, 100psi, 1 1/2" White Face, 1/8-27 NPT
|
|
|
VDO's direct mount high pressure gauge is nice for monitoring oil pressure. Mounting this on the engine lets you compare the actual engine pressure with your gauge, to verify your readings are correct.
|
|
|
|
|
|
|
|
|
|
Innovate LM-2 Windshield Mount, 3814
|
|
|
Innovate LM-2 Windshield Mount, 3814 is used to provide the optimum temporary view for your LM-2 Display while you are driving. The LM-2 is a "tool", unlike the more permanent MTX gauge, and this mount makes using the LM-2 easy!
|
|
|
|
|
|
|
|
|
|
VDO Fuel Gauge, Cockpit, White Face, 2 1/16", V301216
|
|
|
V301216 VDO Fuel Gauge, Cockpit, White Face, 2 1/16" is compatible with VDO Sending Unit # V226001.
|
|
|
|
|
|
|
|
|
|
VDO 250F Water Temp Gauge, Cockpit, Black Face, 2 1/16"
|
|
|
VDO Water Temp Gauge, Cockpit, Black Face, 2 1/16" for our Watercooled friends! The stock idiot light just doesn't cut it! Cylinder head damage (warpage) can occur if you overheat your engine!
|
|
|
|
|
|
|
|
|
|
VDO Voltmeter, Cockpit, White Face, 2 1/16"
|
|
|
VDO Voltmeter, Cockpit, White Face, 2 1/16" is more useful than an Ammeter for your VW bug, bus or ghia. Turn the key on and note the voltage, it should be ~12.8V (good battery). Start up the car, your voltage SHOULD go up as the charging system works.
|
|
|
|
|
|
|
|
|
|
VDO 80psi Oil Pressure Gauge, Cockpit, Black Face, 2 1/16"
|
|
|
VDO 80psi Oil Pressure Gauge, Cockpit, Black Face, 2 1/16" is used to monitor the ultra-critical oil pressure on VW beetles, ghias, and busses. We recommend 10psi/1k RPM as the benchmark, without exceeding 45psi hot pressure (which causes overheating)
|
|
|
|
|
|
|
|
|
|
VDO 80psi Oil Pressure Gauge, Royale, White Face with Chrome Bezel, 2 1/16"
|
|
|
VDO 80psi Oil Pressure Gauge, Royale, White Face with Chrome Bezel, 2 1/16" is used to monitor the ultra-critical oil pressure on VW beetles, ghias, and busses. We recommend 10psi/1k RPM as the benchmark, without exceeding 45psi hot pressure (which causes overheating).
|
|
|
|
