OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!


  VW Parts Catalog > Transmission & Clutch >

Type 2 Bus Straight Swing Axle Conversion Spring Plates (Removes Stock Reduction Boxes), for Type 2 Through 1967
Type 2 Bus Straight Swing Axle Spring Plate Conversion Kit, Removes Stock Reduction Boxes, Fits Type 2 Through 1967
Price is for ONLY the spring plates pictured above. All other components for the conversion you would have to source separately.


 

  • Type 2 Bus Straight Swing Axle Conversion Kit, Removes Stock Reduction Boxes, Fits Type 2 Through 1967 is designed to eliminate your troublesome and $ gear reduction boxes at the outboard end of each rear axle. Lower RPMs for the highway are a bonus!

We strongly recommend that you have a copy of the 1963-67 Type 2 Factory Workshop Manual as a reference.

The purchase price includes

  • 1 Pair of New Spring Plates deisgned for the conversion
In addition to these, YOU WILL ALSO NEED THESE ITEMS!

  • (2) Long Axles from a 1968 Type 1, also used in a 1961-68 Type 3
  • (2) Rear Axle Bearing Covers from a 1961-66 Type 1 (Only available used)
  • Axle Tubes and Fulcrum Covers
  • (2) Axle Seal Kits
  • (2) Rear Axle Bearings
  • (2) Outer Axle Bearing Spacers (Only available used)
  • (2) Inner Axle Bearing Spacers (Only available used)
  • (2) 36mm Rear Axle Nuts (Brake Drum Retaining Nut), if you have a 64-67 Type 2
  • (2) Cotter Pins for the rear axle nuts
  • (2) Axle Boot Kits with clamps and hardware
You also need to update your rear brakes to do the conversion!!

If you have a rear brake drums up to 1963 Type 2, you will use them (even if you have a 1964-67 Type 2), you use them and mill off the snout of the brake drum, and machine off the inner lip on the drum flush.

Now get

  • (2) Left and Right Rear Brake Backing Plates, from a 1968-79 Type 1
  • Set of Rear Brake Shoes, 1968-79 Type 1
  • (2) FRONT Wheel Cylinders, 1968-79 Type 1

If you do not have the 1963 and older Type 2 Brake Drums, you need to acquire some

(2) 1964-65 Type 3 Rear Brake Drums

If you have a Type 2 from 1964-67 you'll need either the 1963 and older Type 2 rear drums, OR the 1964-65 Type 3 rear brake drums; AND

  • (2) Left and Right Rear Brake Backing Plates, from a 1954-64 Type 3
  • (2) Super Beetle Front Wheel Cylinders

Lastly, you can retain the stock Type 2 transmission, but you now have 4 reverse gears and 1 forward speed (since you removed the reduction boxes). You need to flip the R&P over, OR simply get a Swing Axle Type 1 transmission. Keep the original 1960-67 transmission nose cone, to line up the shift rod with the trans.
Price: $349.95
Restrictions: DISCOUNTS/PROMOCODES ARE NOT VALID FOR THIS ITEM


Availability: Usually Ships in 2 to 3 Weeks
: TYPE2-STRAIGHTAXLE-CONV-PLATES

Final Sale Item Agreement

I AGREE TO NON RETURNABLE TERMS FOR THIS ITEM (non-returnable/NO WARRANTY).

FINAL SALE ITEM TERMS AND CONDITIONS
Upon shipment of this item, your purchase is FINAL - the item is NON-RETURNABLE.


QTY:
Overview
 
Type 2 Bus Straight Swing Axle Conversion Spring Plates (Removes Stock Reduction Boxes), for Type 2 Through 1967 is designed to eliminate your troublesome and $$$$ gear reduction boxes at the outboard end of each rear axle. Lower RPMs for the highway are a bonus!

Share your thoughts on this product with other customers...
Click here to be the first to WRITE A PRODUCT REVIEW!