OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!


  VW Parts Catalog > Carbs & Fuel System >

Idle Jets for Weber IDF & DCNF, 74405 (Sold per EACH)
Weber IDF & DCNF Idle Jets


 
Aircooled.Net only carries ORIGINAL Weber JETS FROM ITALY, we do not carry Chinese reproductions which do not flow properly! These are all genuine Weber jets which have been flow tested at the factory.

Jets are sized in "milimeters", so a "50" jet is very close to .5mm. Actually they are rated on flow not size, after they are measured on a flow machine. That's why drilling and reaming jets is not necessarily a good idea, since drilling or reaming can result in a 55 idle flowing more than a 60 idle, based on orifice length and entry/exit radius, etc.
Price: $8.00
Item eligible for Econo/1st Class Mail shipment, min ship charge applies


: 74405

Select Jet Size



QTY:
Overview Warranty Details / Return Info
 
Aircooled.Net only carries ORIGINAL Weber JETS FROM ITALY, we do not carry Chinese reproductions which do not flow properly! These are all genuine Weber jets which have been flow tested at the factory.
Item Features
We are aware that we are a little more expensive than other suppliers of Weber jets, but here is why you should use Aircooled.Net. First, we only sell genuine Weber jets from Italy! Secondly, we will tell you the correct jet sizes to minimize your jet expense, and your valuable time tuning! Other shops that aren't proficient at Weber Tuning will be happy to sell you jets at $4 ea, and you'll wind up with 6 sizes (24 jets) that you don't need! That makes no sense! By buying from us you will not spend more than you have to, our experience will keep your costs down, while providing the highest quality parts.

With that out of the way, we recommend the following idle jet sizes for sea level driving for dual DCNFs and IDFs.

40mm = 47.5-50

42mm = 52-55

44mm = 55

48mm = 57.5-60

Drop the size "1" for every 1k' rise above sea level. So if you have 40 IDFs, in Denver (5k') you'd need ~42.5-45, but the same carbs at sea level would use 47.5-50.

Despite what you have read in "other" places, these sizes will result in the best running (cool) and stelr MPG. Use the main circuit for your power tuning! Read our tuning guide for further tuning tips, you'll save a fortune by buying the jets you need ONCE without guesswork!
Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Add your review too!

Related Items...
Air Jet for Weber IDF & IDA, 77401 (Sold per EACH)
Price: $8.00
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
Weber IDF & IDA Air Jet, 77401
Main Jets for Weber IDF & IDA, 73401 (Sold per EACH)
Price: $8.00
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
Weber IDF & IDA Main Jet
Weber IDF, DCNF, and DFAV/EV Idle Jet O-ring and Idle Mixture Screw O-ring, 41565.002
Price: $1.25
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
Weber IDF, DCNF, and DFAV/EV Idle Jet O-ring and Idle Mixture Screw O-ring, 41565.002
Idle Jet Holder, Weber IDF, DCNF, and DGV Series , 52570.006
Price: $9.95
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
Idle Jet Holder, Weber IDF, DCNF, and DGV Series , 52570.006


  4 of 5 people found the following review helpful:
 
5 of 5 Idle jets December 13, 2012
Reviewer: thomas Scott from torrance, CA United States  
I have dual 40 idfs on my 1776cc, got them set up by my local shop and they just never felt right, seemed sluggish. I used aircooled.net's jet selection chart came up with a 50 idle jet. It solved it my engine is running great i have better mileage and my throttle is crisp!! Btw i live in cali so even with our gas out here yes 50's are better than the 55's  most shops say to use, for dual 40's.

Was this review helpful to you?

SITE USE DISCLAIMER ** READ FOR BEST UNDERSTANDING and USE OF OUR PARTS SERVICE!**

PRODUCT AVAILABILITY can vary and short-term backorders are common. Immediate shipment of requested products is NOT guaranteed. Orders are processed in the order that they are received and order fulfillment time varies.

PRODUCT IMAGES are representative only. Actual product may differ in appearance. Please do NOT rely on PHOTOS while shopping as many of our products have selectable product options that may change the nature of the product being ordered compared to the representative photo. Make your product selections based on the PRODUCT DESCRIPTION and OPTION INFORMATION presented in the detailed product listing.

CATALOG ERRORS: Although every effort has been made to provide accurate pricing and product technical and vehicle application information, THIS CATALOG MAY CONTAIN ERRORS (typographical, photographic, or informational). All information should be verified prior to use.

PRICES are subject to change without obligation. In most cases we are able to honor advertised price, but in the RARE case a substantial price increase occurs, you would be notified and given the option to cancel.

PRODUCT INFORMATION: All information provided by Aircooled.Net (via website or email) is for USE AT YOUR OWN RISK. All products purchased should be inspected, measured, cleaned and properly assembled prior to installation. Since Aircooled.Net has no control over product installation, we will not be held liable for any consequential costs or damages associated with products purchased.