We are in the midst of renovating our site!

Our online store will re-open on WEDNESDAY AUGUST 12th with some exciting updates and improvements to your parts shopping experience.

If you already have an order in process with us, don't panic!

We are still processing and shipping orders from our warehouse as normal even while our site is offline.

We sincerely appreciate your patience while we are doing these site upgrades.


  VW Parts Catalog > Engine Parts >

STROKER Piston & Cylinder Set, 85.5mm x 82mm Cast, Type 1
STROKER Piston & Cylinder Set, 85.5mm x 82mm Cast, Type 1


 
STROKER Piston & Cylinder Set, 85.5mm x 82mm Cast, Type 1. These can be used on 78-84mm stroked cranked, and slip into 1300-1600cc cases. This cylinder set fits a 90mm case opening, and a 93.8mm head opening. These will withstand 7500 RPMs, and are tolerant of around 8psi boost!

Pin Height is 1.335". Wrist pins have a .155" wall thickness. Pistons utilize a 2mm, 2mm, 5mm ringset.

Price: $299.95

: 85.5X82CC

Add Piston Balancing?

Piston Balance Add-on:


The fee above is for LABOR service to balance a set of pistons for you. The more precisely balanced your pistons are, increases engine life. Recommended tolerance for stock engines is within 5 grams We balance to a much tighter 0.5 gram tolerance. It is not unusual for pistons out-of-the-box to be off by more than 20 grams, so even if you don't have us do the balancing for you, make sure you don't skip this key engine-building step!

It's important for you to understand that when we balance the pistons and wrist pins, they are in MATCHED PAIRS. Make sure you DO NOT SWAP PINS and PISTONS during the cleaning and assembly process! Pins are sometimes 1.5g out, and we often have a heavy pin with a light piston, and a light pin with a heavy piston. If you mix them you no longer have a balanced set!

QTY:
Overview
 
STROKER Piston & Cylinder Set, 85.5mm x 82mm Cast, Type 1. These can be used on 78-84mm stroked cranked, and slip into 1300-1600cc cases. This cylinder set fits a 90mm case opening, and a 93.8mm head opening. These will withstand 7500 RPMs, and are tolerant of around 8psi boost!

Pin Height is 1.335". Wrist pins have a .155" wall thickness. Pistons utilize a 2mm, 2mm, 5mm ringset.


Related Items...
DIRKO RTV Sealant (Silicone)
Price: $14.95
DIRKO RTV Sealant (Silicone)
Balance Set of 4 Pistons, Labor
Price: $50.00
Balance Set of 4 Pistons, Labor
Barrel Shims (aka: Cylinder Base Shims, Cylinder Spacers), 1300-1600cc, .010/.020/.040/.060/.090", Set of 4
Price: $14.95
Barrel Shims (aka: Cylinder Base Shims, Cylinder Spacers), 1300-1600cc, .010/.020/.040/.060/.090", Set of 4

Share your thoughts on this product with other customers...
Click here to be the first to WRITE A PRODUCT REVIEW!