NOTICE

Supply of many sought after parts is limited. Covid ripple-effect economic disruptions have hampered our company's ability to restock items reliably. We are doing what we can to recover from the changes to our industry and the effects they have had on our business, but currently a lot of shipments are delayed and our response time to emails are slow (we are severely short-staffed).


Please do NOT email to inquire for stock status. Instead, to get stock status, place an order request, and the items will ship if they are in-stock, OR we will post an itemized stock status for delayed items typically within 2-3 business days.

Placing an order request adds you to the reservation waitlist for out of stock items. We work diligently to source and fulfill backordered items as best we can -- backorders with unreliable restock ETAs are VERY frustrating for us as well. You can trust that even if we can't reply to your email, we ARE working on it and will contact you when we have any updated news to share. And of course, you can also email to cancel un-shipped/un-paid items at any time as long as they are not special order or made/machined-to-order.


Please only continue if you are prepared to be PATIENT. Your requested items might be significantly delayed by supplier-level backorder timeframes, and we usually aren't given reliable ETA information.

Thank you for your continued support and understanding.


  VW Parts Catalog > Engine Parts >

Oil Pressure Boost Kit, 1970 & Later (Dual Relief Cases)
Oil Pressure Boost Kit, 1970 & Later (Dual Relief Cases)


 
Oil Pressure Boost Kit, 1970 & Later (Dual Relief Cases) do NOT do what most folks think they do. These raise the max pressure at which oil is bypassed back to the sump, and it routes more oil through the oil cooler sooner. It will raise the maximum oil pressure that the engine exhibits. If you have a low oil pressure problem, you need to make sure the relief piston tops are FLAT (they are often not flat at all), and take a peak at the piston seating surface in the case, they are often not flat either, and either of these situations will bleed off vital oil pressure. The other thing to check is your oil pump gear clearances, and end play clearance. Blueprinting the oil pump following the methods shown in http://vwparts.aircooled.net/How-to-Hotrod-Your-VW-Engine-by-Jeff-Fischer-p/how-to-hotrod.htm will maximize oil pressure at idle.
Price: $7.95

: OIL-PRESSURE-BOOST-KIT-DUAL


QTY:
Overview
 
Oil Pressure Boost Kit, 1970 & Later (Dual Relief Cases) do NOT do what most folks think they do. These raise the max pressure at which oil is bypassed back to the sump, and it routes more oil through the oil cooler sooner. It will raise the maximum oil pressure that the engine exhibits. If you have a low oil pressure problem, you need to make sure the relief piston tops are FLAT (they are often not flat at all), and take a peak at the piston seating surface in the case, they are often not flat either, and either of these situations will bleed off vital oil pressure. The other thing to check is your oil pump gear clearances, and end play clearance. Blueprinting the oil pump following the methods shown in http://vwparts.aircooled.net/How-to-Hotrod-Your-VW-Engine-by-Jeff-Fischer-p/how-to-hotrod.htm will maximize oil pressure at idle.
Item Features
Here's how the stock VW oil system works. Back when the engine was designed, the only oil available was single grade oil. The engineers made a simple assumption, low oil pressure means the oil is hot. This was reasonable because oil pressure drops as it gets warmer. Maximum pressure occurs with cold oil because it is stiff and resistant to flow. Hot oil flows easily and drops pressure. So they assume that low oil pressure = hot oil, and high oil pressure equals cold oil.

There are 2 separate oil control mechanisms, the first is pressure control, which is done by the flywheel piston. When pressure is "excessive", the piston is forced down and oil pressure is relieved via a bypass port back to the sump. If you have a HUGE pump (30mm or larger), even when the piston is down it still won't bypass enough oil because the relief port is too small. So if you are careful you can increase the size if this relief port, but this is not necessary if you only use 26mm pumps like we do. Putting in a stiffer spring will increase the point at which the pressure will bypass. This usually happens with a cold engine, you can see it on the gauge when you hit the bypass point, all of a sudden the pressure drops from ~50psi to 30 for example. It will recover when the piston closes again.

The cooler relief piston operates in a similar manner, but it senses the pressure drop across the cooler. If the oil is cold, there is a lot of pressure drop across the cooler (cold oil is thick and tough to move). If the pressure drop is small, "the oil must be hot", and the piston remains closed and routes as much oil as possible to the oil cooler. Oil pressure is NOT affected by the cooler relief system, it's sole responsibility is for sending the appropriate amount of oil to the stock oil cooler. If the cooler relief spring is replaced with a stiff one, the oil will be routed to the cooler before it gets warmed up, and the engine oil will have a tough time reaching operating temperature. We feel that oil is too cold until it goes >180F, 200F is better. Anything from 200-230F is fine and nothing to worry about.

There are a lot more VWs running around "too cold" than properly warmed up, which is also why you should ALWAYS use your flaps and thermostat!


Related Items...
Hex Relief Spring Plugs, 22mm Head, PAIR
Price: $15.95
Hex Relief Spring Plugs, 22mm Head, Pair

Share your thoughts on this product with other customers...
Click here to be the first to WRITE A PRODUCT REVIEW!