OUR ONLINE CHECKOUT is CLOSED and we are NOT accepting any NEW orders at this time.

We are still fulfilling and shipping previously submitted and/or delayed order requests (as product availability allows) UNTIL NOVEMBER 15th 2022.

But after November 15th, all still pending backordered unshipped items will be automatically CANCELLED **(except for any special ordered drop-shipped or made/machined-to-order items).

Our ability to respond to emails is greatly hampered by being under-staffed during this downsize transition time. But we continue to endeavor to answer email inquiries as best we can. And we will continue responding to emails through until early March 2023 because we are wholly committed to resolving any other issues that may arise from previous sales. It is still UNCERTAIN, but we may re-open a substantially downsized version of our store again in the Spring of 2023.

We sincerely appreciate your patience, understanding during this period of restructuring and/or closing. And a huge thank you to all of you whose support and loyalty we have been the beneficiary of over the 23 years that we have worked diligently to support the information and parts needs of the aircooled VW community!


  VW Parts Catalog > Engine Parts >

Engine Case Sealing Nut, Main Studs, 12X1.5mm, 113-101-131A
Engine Case Sealing Nut, Main Studs, 12 X 1.5mm, 113-101-131A


 
Engine Case Sealing Nut, Main Studs, 12 X 1.5mm, 113-101-131A are the 12 x 1.5mm nuts that secure the main bearing saddles in the case. The second purpose is to not leak oil! These nuts should NOT be re-used. The red "sealer" prevents oil from leaking out the studs. This is the secondary seal, the first being the Black O-ring that slips on the main saddle stud.

These do NOT fit Type 4 engines, only Type 1 based engines. Each engine needs 6 of these nuts!

You can up the torque of these nuts to 30lb/ft for a longer case life!

Price: $3.00
Item eligible for Econo/1st Class Mail shipment, min ship charge applies


: 113-101-131A


QTY:
Overview
 
Engine Case Sealing Nut, Main Studs, 12 X 1.5mm, 113-101-131A are the 12 x 1.5mm nuts that secure the main bearing saddles in the case. The second purpose is to not leak oil! These nuts should NOT be re-used. The red "sealer" prevents oil from leaking out the studs. This is the secondary seal, the first being the Black O-ring that slips on the main saddle stud.

These do NOT fit Type 4 engines, only Type 1 based engines. Each engine needs 6 of these nuts!

You can up the torque of these nuts to 30lb/ft for a longer case life!

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Add your review too!

Related Items...
Engine Case Washer for 12mm Nuts (Need 6) on Main Studs, EACH, 043-101-129
Price: $0.35
Item eligible for Econo/1st Class Mail shipment, min ship charge applies
Engine Case Washer for 12mm Nuts (Need 6) on Main Studs, EACH, 043-101-129


  1 of 1 people found the following review helpful:
 
5 of 5 Good Seal November 20, 2013
Reviewer: Dennis Hornung from Richboro, PA United States  
Used these as well as the oil pump stud sealing nuts and am happy with the results from both of them.

Was this review helpful to you?