We are in the midst of renovating our site!

Our online store will re-open on WEDNESDAY AUGUST 12th with some exciting updates and improvements to your parts shopping experience.

If you already have an order in process with us, don't panic!

We are still processing and shipping orders from our warehouse as normal even while our site is offline.

We sincerely appreciate your patience while we are doing these site upgrades.

VW Parts Catalog > Ignition > Capacitive Discharge Ignitions (CDIs)
4 products found
Sort By:
1
Mallory Hyfire VI MAP Sensor Wiring Harness, 29785
Mallory Hyfire VI MAP Sensor Wiring Harness, 29785
Price: $34.95

Mallory Hyfire VI MAP Sensor Wiring Harness, 29785 connects your MAP Sensor to the Hyfire VI CDI Ignition Box. more info
Mallory Hyfire VI MAP Sensor, 2 Bar, 716
Mallory Hyfire VI MAP Sensor, 2 Bar, 716
Price: $64.95

Mallory Hyfire VI MAP Sensor, 2 Bar, 716 is the unit that reads your manifold vacuum and boost, and relays the signal to the Hyfire VI CDI Box. You'll also need the 29785 harness to connect the 2 together. This is the 3 Bar version for up to 15psi. Reading the MAP allows you to set a boost retard in the Hyfire VI CDI Box to prevent detonation under boost conditions. more info
Mallory Hyfire VI-A (Hyfire 6-A) CDI Ignition Box (Capacitive Discharge Ignition), Basic Unit, Digital Ignition, 6852M
Mallory Hyfire VI-A (Hyfire 6-A) CDI Ignition Box (Capacitive Discharge Ignition), Basic Unit, Digital Ignition, 6852M
Price: $219.95

Mallory Hyfire VI-A (Hyfire 6-A) CDI Ignition Box (Capacitive Discharge Ignition), Basic Unit, Digital Ignition, 6852M is basically a device that charges your coil with 400V instead of the measly 12 it normally gets. This results in a bigger spark!

With this Capacitive Discharge (CD) system, you will have a stable, uniform spark throughout your engine's rpm range, with no high rpm drop-off like other boxes, or with a standard Kettering Ignition (Points and Condenser, or Points Replacement Device charging the coil with 12 Volts.

This is the basic box, with no programmable rev limiters or 2-step devices, but the spark is identical.

Compatible with most electronic and magnetic trigger systems.

You must have good quality plug wires, the high energy spark will push them to the limit!

more info
MSD CDI Ignition Box (Capacitive Discharge Ignition), Basic Unit, Digital Ignition, 6201M
MSD CDI Ignition Box (Capacitive Discharge Ignition), Basic Unit, Digital Ignition, 6201M
Price: $219.95

MSD CDI Ignition Box (Capacitive Discharge Ignition), Basic Unit, Digital Ignition, MSD6201 is basically a device that charges your coil with 400V instead of the measly 12 it normally gets. This results in a bigger spark!

This MSD unit is a direct replacement for Mallory Hyfire VI-A (Hyfire 6-A) PN 6852M (MSD recently bought out Mallory).

With this Capacitive Discharge (CD) system, you will have a stable, uniform spark throughout your engine's rpm range, with no high rpm drop-off like other boxes, or with a standard Kettering Ignition (Points and Condenser, or Points Replacement Device charging the coil with 12 Volts.

This is the basic box, with no programmable rev limiters or 2-step devices, but the spark is identical.

This is compatible with most electronic and magnetic trigger systems.

You must have good quality plug wires, the high energy spark will push them to the limit!

During installation, we recommend you install a 20A fuse between the battery and the CDI unit, and wire the Ground directly to the battery for best results.

more info
   
 
1