EMAIL SUPPORT:

CUST CARE: custservice@aircooled.net

VW QUESTIONS: vwtech@aircooled.net

RETURN REQUESTS:
returns@aircooled.net







Aircooled.Net Inc.
379 West 6500 South
Murray, Utah 84107 USA


Email: custservice@aircooled.net


PHONE (LEAVE A MESSAGE):
801-453-1906


We rely heavily on email as the most efficient and accurate way to serve our customers. Please only contact us by PHONE if you are unable to email for some reason, or if your situation (or tech question) is complicated.

We do NOT offer "formal" phone hours, but instead RETURN ALL MESSAGES (usually within 1-2 business days) at a time when we are able to focus on your situation/questions and aren't preoccupied with the flurry of shipments that we are shipping to waiting customers in the busy part of our day. We return calls DURING THE DAY at various times throughout the week as time allows, so please be prepared to wait a few days for us to call you back. If you are phoning for status of a backorder or order in process, you may receive your reply by EMAIL.


  VW Parts Catalog > Engine Parts >

ACN Heavy Duty Aluminum Pushrods for SCAT 1.4s, Set of 8 (assembled)
ACN Heavy Duty Aluminum Pushrods for SCAT 1.4s, Set of 8


 
Aircooled.Net's World Famous HD Aluminum Pushrods eliminate the CLATTER CLATTER CLATTER that steel pushrod owners suffer from! These pushrods maintain your valve lash under all engine temps, instead of lash increasing as the engine gets hot!

These are the proper length to install SCAT's great 1.4 Ratio Rocker Arms (20195) onto your engine, IF you had original length PRs to begin with!
Price: $139.95
Country of Manufacture or Origin: MADE IN USA

PN: ACNHDALPRSCAT14


Qty:
Product Overview
 
Aircooled.Net's World Famous HD Aluminum Pushrods eliminate the CLATTER CLATTER CLATTER that steel pushrod owners suffer from! These pushrods maintain your valve lash under all engine temps, instead of lash increasing as the engine gets hot!

These are the proper length to install SCAT's great 1.4 Ratio Rocker Arms (20195) onto your engine, IF you had original length PRs to begin with!
Item Features
Are you sick of the clackity-clack clack clack valvetrain noise that steel pushrods give you when the engine gets hot? SO WERE WE! That's why we designed these aluminum pushrods to assure that the valve clearance is constant regarless of temperatures (PR expansion is the same as stock)!

We successfully use these even on VW Dual Valve Spring equipped engines, with ratio rockers, up to 9500 RPM! These are over 3X stronger then the other Aluminum "HD" pushrods available (which we stopped selling due to failures). Run these at .006", same as stock, which will give you .002" when hot. These pushrods are designed by and are exclusive to Aircooled.Net.

These 3/8" 2024 T-3 heat treated .095" wall thickness pushrods are good to 400-500 lbs of spring pressure for you guys with HUGE valves and valvesprings! Get the benefit of proper expansion and quiet running in a pushrod that can handle almost any valves, RPMs, and springs that you throw at it!

We have found the spring pressure limit of 400lbs with 1.5 rockers and 8200 RPM (straight PRs), and no limit yet on the dual tapered design. If you use less spring, less rocker, or less RPM you'll be fine.

One main reason for running these is to reduce valvetrain mass so you can drop spring pressure, so don't go nuts on the spring pressure!

WARNING: These steel pushrod tips are case hardened .012-.015" deep to a 60-62 Rockwell on the C scale (that means they are HARD). YOU must check them for smoothness, and MAY have to smooth them (polish) with some fine emory or sandpaper prior to installation for best results.

Valve lash is critical on aluminum pushrods. It is possible to have a pushrod failure even though you haven't exceeded our RPM or spring pressure limits, and this is always due to excessive valve lash. If your valve lash gets over .010", the tips of the pushrods WILL get pounded into the pushrod. This is not a problem if your valve clearance is the way it's supposed to be, but a swivel foot failure, or loose valve adjusting screw, can cause excessive lash which can ruin these pushrods quickly.

WEIGHT: For reference, in a 11.600" length, the weight of a stock pushrod is 39.1g, ACN HD Aluminum are 47.8g, ACN Dual Tapered HD Aluminum is 55.8g, Manton Chromoly Straight are 90.2g, and Manton DT Chromoly are 100.5g.

The straight pushrods have an OD of the pushrod body of 3/8" (.375") for those concerned with pushrod tube interference. For reference, the stock pushrod is 10.935 inches long on the 1300, 1500, and 1600 engines. Before you make the jump to Aluminum pushrods, be aware that valve tapping can be caused by valve lash, AND ROCKER ARM SIDE PLAY. Make sure your sideplay is tightend to .005", a loose rocker (side to side) will sound just like a loose valve adjustment. IMPORTANT: Measurements given are TIP TO TIP measurements (tips installed). And you cannot return pushrods that you have been cut and assembled! These pushrods have a counterbore, so get the shortest pushrod that is longer than you need.


Related Items...
Titanium Valvespring Retainers, VW HD and Dual Springs, Set of 8
Price: $99.95
Titanium Valvespring Retainers, VW HD and Dual Springs, Set of 8
Chromoly Valve Spring Retainers, Set of 8
Price: $25.95
Chromoly Valve Spring Retainers, Set of 8
SCAT Forged 4340 Chromoly 1.4 Ratio Rocker Arm Set, Pair, 20195
Price: $249.95
SCAT Forged 4340 Chromoly 1.4 Ratio Rocker Arm Set, Pair, 20195
HD Single Valve Springs, Set of 8
Price: $39.95
HD Single Valve Springs, Set of 8

Share your thoughts on this product with other customers...
Click here to be the first to WRITE A PRODUCT REVIEW!

PLEASE NOTE: Product availability can vary and short-term backorders are common. Immediate shipment of requested products is NOT guaranteed. Orders are processed in the order that they are received and order fulfillment time varies. Product Images are representative only. Actual product may differ in appearance. Although every effort has been made to provide accurate pricing and product technical and vehicle application information, THIS CATALOG MAY CONTAIN ERRORS (typographical, photographic, or informational). Product prices are subject to change without obligation. In most cases we are able to honor advertised price, but in the RARE case a substantial price increase occurs, you would be notified and given the option to cancel. All information provided by Aircooled.Net (via website or email) is for USE AT YOUR OWN RISK. All products purchased should be checked and installed by a qualified mechanic. Since Aircooled.Net has no control over product installation, we will not be held liable for any consequential costs or damages associated with products purchased.