NOTICE

Please read this notice and only continue if you are willing to abide by our updated backorder acquisition and fulfillment terms of service.


Supply-chain disruptions have hampered our ability to acquire/restock items reliably. Additionally, a lack of backorder ETA information is a frustrating "new normal" for our hobby. As a result, we have had to change our BACKORDER ACQUISITION TERMS OF SERVICE. If you opt to have us "send backorders later", backordered items will ship automatically if we are able to get them within 30 days. Longer than 30 day backorders WILL BE AUTOMATICALLY CANCELLED. Made-to-order, Special-Order, and Direct-shipped items may take longer than 30 days, and will NOT be auto-canceled.


On the next page, you will be prompted to select a BACKORDER HANDLING INSTRUCTION for your Order Request. In every case, you are NOT CHARGED for out-of-stock items (we ONLY charge for items that are available to be shipped in a timely or reasonably reliable timeframe). If you opt to "send backorders later" you are automatically added to the waitlist for those items, and we post stock status / backorder info to your Order Status/Progress/History Detail View in your online Customer Account. You can email to cancel un-shipped/un-paid items at any time as long as they are not direct-shipped, special order or made/machined-to-order.

Currently many shipments are delayed and our response time to emails are slow (we are severely short-staffed). Please trust that even if we can't reply to your email promptly, we are continuing to work to fulfill your Order Request as best we can, and we will contact you once we have any new information that is not already posted in your online Order Progress/History area in your customer account.


Please only continue if you are prepared to be PATIENT. Some of the items in your cart might be out-of-stock, and if that is the case, within a day or two we will post itemized stock status information to your account and/or email you to let you know. We appreciate your continued support and understanding.



  VW Parts Catalog > Hardware Cables Hoses Grommets > Nuts >

ACN Flanged Racing Intake and Exhaust Nuts, 8 x 10mm, 50 Nuts
ACN Flanged Racing Intake and Exhaust Nuts, 8 x 10mm, 50 Nuts


 
ACN Flanged Racing Intake and Exhaust Nuts, 8 x 10mm, 50 Nuts were designed after evaluating all problems with other nuts. We tried to solve them all with this product! 8mm threads, with a 10mm hex, and a 13mm flanged bottom to spread the clamping forces! You can torque these to 35lb/ft, though we feel that is excessive. The threads fail at just over 40lb/ft. We have tried these in several different alloys (including Stainless Steel) and success with one combination was the one we used!

Once you use these you will never EVER go back to the Brass Nuts (that strip and round off), or the barely better 12mm ones out there.

These are a LOT smaller than 11mm on the Head, and the flange keeps the header far enough away from the nut to allow your socket or wrench head enough room to get on and off!

We use these all over because they are so useful. The obvious application is header nuts, when you have a larger than stock header. These even work on exhausts as big as 2 1/4"!!!!! The not so obvious application are to hold down your intake manifold(s)! Now you have a ton of room to use a FAST Ratchet with a long extension above the carb top! You can take a dual carb system off in under a minute after a little practice! Imagine, no more bloody knuckles after an hour of fighting your car!!!!

Bulk pack of 50 nuts at a nice discount!

Price: $40.00

: ACN-NUTS-50


QTY:
Overview
 
ACN Flanged Racing Intake and Exhaust Nuts, 8 x 10mm, 50 Nuts were designed after evaluating all problems with other nuts. We tried to solve them all with this product! 8mm threads, with a 10mm hex, and a 13mm flanged bottom to spread the clamping forces! You can torque these to 35lb/ft, though we feel that is excessive. The threads fail at just over 40lb/ft. We have tried these in several different alloys (including Stainless Steel) and success with one combination was the one we used!

Once you use these you will never EVER go back to the Brass Nuts (that strip and round off), or the barely better 12mm ones out there.

These are a LOT smaller than 11mm on the Head, and the flange keeps the header far enough away from the nut to allow your socket or wrench head enough room to get on and off!

We use these all over because they are so useful. The obvious application is header nuts, when you have a larger than stock header. These even work on exhausts as big as 2 1/4"!!!!! The not so obvious application are to hold down your intake manifold(s)! Now you have a ton of room to use a FAST Ratchet with a long extension above the carb top! You can take a dual carb system off in under a minute after a little practice! Imagine, no more bloody knuckles after an hour of fighting your car!!!!

Bulk pack of 50 nuts at a nice discount!


Related Items...
ACN Flanged Racing Intake and Exhaust Nuts, 8 x 10mm, 100 Nuts
Price: $75.00
ACN Flanged Racing Intake and Exhaust Nuts, 8 x 10mm, 100 Nuts
ACN Flanged Racing Intake and Exhaust Nuts, 8 x 10mm, 500 Nuts
Price: $350.00
ACN Flanged Racing Intake and Exhaust Nuts, 8 x 10mm, 500 Nuts
ACN Flanged Racing Intake and Exhaust Nuts, 8 x 10mm, 1000 Nuts
Price: $700.00
ACN Flanged Racing Intake and Exhaust Nuts, 8 x 10mm, 1000 Nuts

Share your thoughts on this product with other customers...
Click here to be the first to WRITE A PRODUCT REVIEW!